Change IP/Subnet ER605
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello,
How to change the IP/Subnet of the ER605 router in Controller mode?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Pouet
Pouet wrote
@Clive_A
I understand this solution : "Or move the whole VLAN1 192.168.0.1/24 to 192.168.15.1/24"
But for "Create a new VLAN interface to have two LANs" => Then my router is still with 192.168.0.1, how to get 192.168.15.1 for the Router ?
Then change default VLAN 1 subnet to 192.168.15.1/24.
192.168.15.1 can also access the web GUI of the router. Same like 192.168.0.1.
- Copy Link
- Report Inappropriate Content
Hi @Pouet
Please refer to the User Guide for the basic configuration of the device.
Go to Wired Networks > LAN.
- Copy Link
- Report Inappropriate Content
@Clive_A So I have to change the LAN1 Subnet ?
Can I keep the default LAN1 and move the Router to another LAN ?
- Copy Link
- Report Inappropriate Content
Hi @Pouet
Pouet wrote
@Clive_A So I have to change the LAN1 Subnet ?
Can I keep the default LAN1 and move the Router to another LAN ?
Up to you. Any router would allow you to change the default VLAN 1. You can change LAN1 but you have to be aware of what you are doing.
You can create a new VLAN interface. But I quite don't understand the second question. It's ambiguous.
- Copy Link
- Report Inappropriate Content
@Clive_A For example, my router is 192.168.0.1 on LAN1.
I want my router 192.168.15.1 on LAN 15.
How to procced ?
Thank you
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Clive_A
I understand this solution : "Or move the whole VLAN1 192.168.0.1/24 to 192.168.15.1/24"
But for "Create a new VLAN interface to have two LANs" => Then my router is still with 192.168.0.1, how to get 192.168.15.1 for the Router ?
- Copy Link
- Report Inappropriate Content
Hi @Pouet
Pouet wrote
@Clive_A
I understand this solution : "Or move the whole VLAN1 192.168.0.1/24 to 192.168.15.1/24"
But for "Create a new VLAN interface to have two LANs" => Then my router is still with 192.168.0.1, how to get 192.168.15.1 for the Router ?
Then change default VLAN 1 subnet to 192.168.15.1/24.
192.168.15.1 can also access the web GUI of the router. Same like 192.168.0.1.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 460
Replies: 7
Voters 0
No one has voted for it yet.