Site to Site VPN Connects but can't ping devices
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi,
I have set up a site to site office scenario where a branch office connects to a home office using ER605s. I am using Omada controller and the branch office connects successfully to the home office and i can ping the ER605's from both ends. From the home office i can also ping the PC that the branch office controller software is running on, but no other devices. I cannot ping any devices on the head office. I've watched the youtube videos and have tried to set this up many times, but always the same results. Any help would be appreciated.
From the log on the home office
| 4 | 2023-11-15 15:43:44 | IPsec | NOTICE | [osg:40-ED-00-6E-BC-EE]: Set up IPsec connection successfully. (Peers=x.x.167.85<->x.x.58.109) |
| 5 | 2023-11-15 15:43:44 | IPsec | NOTICE | WAN: Phase 2 of IKE negotiation succeeded. (Peers=x.x.167.85<->x.x.58.109) |
| 6 | 2023-11-15 15:43:43 | IPsec | NOTICE | WAN: Phase 1 of IKE negotiation succeeded. (Peers=x.x.167.85<->x.x.58.109) |
ipconfig from the branch office:
Wireless LAN adapter Wi-Fi 2:
Connection-specific DNS Suffix . : lan
IPv4 Address. . . . . . . . . . . : 192.168.0.108
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.0.1
ipconfig from the home office:
Ethernet adapter Ethernet 4:
Connection-specific DNS Suffix . :
Link-local IPv6 Address . . . . . : fe80::ff8e:1063:ef57:c58c%11
IPv4 Address. . . . . . . . . . . : 192.168.1.110
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
