Greetings! I've been struggling with getting my Omada hardware and software controller to work with Vlans on my Aruba 2930 switch. I have Vlans set up as interfaces and they work fine between my Omada managed hardware (ER605 router and 2 Jetstream switches) but I can't get my Aruba switch to work with the Vlans. On the Aruba switch I have Vlan1 and Vlan20. I have port 21 on the switch plugged into port 3 on the Omada switch and in the contoller software, the profile is "All" which should allow all Vlans. On the Aruba switch I have port 23 on a trunk and port 1 untagged with a laptop plugged in for testing. I've included screenshots and any help is appreciated. If everything looks good from an Omada standpoint, I'll find an Aruba forum and try there. Thanks in advance!