Home

Forums

Stories

Knowledge Base

Business Community > All Threads > Site to Site VPN with er7206 and OC200. Can not see From Main site the pcs from braches.

< All Threads

Site to Site VPN with er7206 and OC200. Can not see From Main site the pcs from braches.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Site to Site VPN with er7206 and OC200. Can not see From Main site the pcs from braches.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

b00001

2023-10-23 11:11:09 - last edited 2023-10-27 08:00:22

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-10-23

Site to Site VPN with er7206 and OC200. Can not see From Main site the pcs from braches.

2023-10-23 11:11:09 - last edited 2023-10-27 08:00:22

Model: ER7206 (TL-ER7206)

Hardware Version: V1

Firmware Version: 1.3.0

Hi.

I got a 3 sites.

Main Site A (10.1.0.0) and there are connected two branches A (192.168.10.0) and B (192.168.20.0)

All three sites are using ER7206 and in every site there is an OC200 controller.

On mains site the ER7206 is setted as Responder and both branches are setted as Initiators.

Brach sites can ping tplink devices on Main sites and the Opposite.

For example from branch B I can get to the OC200 controller of main site A (10.1.0.100) and also from Main site A I can access the OC200 controller of The branch site A as being on the same network.

I can not ping windows PCs and find them and share resources between the pcs of different sites or for example I can not acess the DVR from Main Site A when I am at Branch site B.

It seems that I can access the webpages of the Tplink hardware and nothing else form each sites.

Why?

I want main and branch sites to be able to access all pcs and local devices between them.

1 Accepted Solution

KimcheeGUN

LV4

2023-10-23 14:18:17 - last edited 2023-10-27 08:00:22

Posts: 602

Helpful: 280

Solutions: 42

Stories: 0

Registered: 2022-07-05

Re:Site to Site VPN with er7206 and OC200. Can not see From Main site the pcs from braches.-Solution

2023-10-23 14:18:17 - last edited 2023-10-27 08:00:22

@b00001

Do you have all the remote subnets configured in the VPN settings?

Copy and Paste your VPN configs (mark out the sensitive data pls) so we can see the settings.

ALSO, matters on your Windows firewall settings, PING is disabled.

I can not teach anyone anything - I can only make them think - Socrates

Recommended Solution

Tedd404

LV4

2023-10-24 02:43:16

Posts: 584

Helpful: 144

Solutions: 35

Stories: 0

Registered: 2022-01-05

Re:Site to Site VPN with er7206 and OC200. Can not see From Main site the pcs from braches.

2023-10-24 02:43:16

@b00001

all because windows. if you can access the devices freely between brand and main, but not windows pcs, then windows dummb firewall is to blame.

i know this because I came across this not on my clients, but also on my home network.. dummy firewall. you should consult the windows community or seek help on google. it should be network firewall.

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.

b00001

2023-10-23 11:11:09 - last edited 2023-10-27 08:00:22

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2023-10-23

Information

Helpful: 0

Replies: 2

Site to Site VPN with er7206 and OC200. Can not see From Main site the pcs from braches.

Site to Site VPN with er7206 and OC200. Can not see From Main site the pcs from braches.

Information

Voters 0

Tags