Business Community > All Threads > ["Solved" - ish ] OC200 v1 - Simply won't upgrade to 1.26.3
< All Threads

["Solved" - ish ] OC200 v1 - Simply won't upgrade to 1.26.3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

["Solved" - ish ] OC200 v1 - Simply won't upgrade to 1.26.3

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
["Solved" - ish ] OC200 v1 - Simply won't upgrade to 1.26.3
["Solved" - ish ] OC200 v1 - Simply won't upgrade to 1.26.3
2023-10-13 16:36:57 - last edited 2023-10-23 19:39:45
Tags: #Firmware Update
Model: OC200  
Hardware Version: V1
Firmware Version: 1.24.0 Build 20230328 Rel.52384

Pretty much what's in the subject.


Log into controller "System Settings" page, Hardware Controller section. Select "Browse", select the unzipped firmware image (OC200v1_un_1.26.3_20230906_rel36269_up.bin) -> "Upgrade" -> Confirm "Upgrade". It spins for awhile (several minutes), then nothing- just back to the upgrade modal dialog. Unit doesn't upgrade, doesn't reboot. 


There are no events in the controller log.
 


I have rebooted the device, and tried two different browsers (MS Edge and Firefox).

P.S. - Please start including hashes of the firmware files!

OC200v1_un_1.26.3_20230906_rel36269_up.bin    SHA-1    1CB95C7062D40A7F17EC6095FF85696BBD1E3B48


==

Opening browser dev tools there's a lot of "errors" and such,

after the POST to https://{LocalIP}/{SomeGUIDLikeId}/api/v2/files/manualUpgrade after 10 minutes final response in NS_BINDING_ABORTED, but while waiting for that you get
the occasional POST to  https://{LocalIP}/{SomeGUIDLikeId}/api/v2/alerts/num?_=1697215341860

 

==

I've tried using the android mobile app, clicking on "Firmware Upgrade" only gives "Omada Server Error".

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:OC200 v1 - Simply won't upgrade to 1.26.3-Solution
2023-10-23 19:39:04 - last edited 2023-10-23 19:39:13

  @Hank21 
1 - No, controller wasn't bricked, nor even in a bad state. It simply wouldn't attempt the upgrade.

2 - Yesterday I started having lots of "slowness" that was dropped packets, even between client and all the omada components: Controller, router, direct to APs...

I methodically rebooted each one separately, and it was only after the last AP rebooted that everything was "fixed". On a hunch, I then tried the firmware update to the controller, (same exact process, no changes), and it completed first try!?!

Super weird/concerning that a misbehaving AP (that I wasn't connected through) could interfere w/ the controller like that.

Recommended Solution
  0  
  0  
#6
Options
7 Reply
Re:OC200 v1 - Simply won't upgrade to 1.26.3
2023-10-14 11:19:18

  @YATechMonkey 

 

You could take a backup, reset then try update and restore.   Its a brutal way of doing it, but might work?

  0  
  0  
#2
Options
Re:OC200 v1 - Simply won't upgrade to 1.26.3
2023-10-16 10:00:49

Hello @YATechMonkey,

 

It seems OC200 became bricked after the firmware was upgraded.

Please try the recovery mode following this link.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#3
Options
Re:OC200 v1 - Simply won't upgrade to 1.26.3
2023-10-17 15:47:11

  @YATechMonkey 

 

I just tried to upgrade last night  using the automated upate within the oc200 interface, and end up with page not found after reboot.

 

Reset everything and even downgraded back at least 4 firmware versions

 

I get perm cloud light flashing and the second ethernet port light flashes even though i have nothing connected to it.

The only page i can ever get is the recovery page.

 

All i can thanks tplink

  0  
  0  
#4
Options
Re:OC200 v1 - Simply won't upgrade to 1.26.3
2023-10-18 01:58:05

Hi @Whiteraft，

 

So what is the current firmware version of your OC200 now?

Did the firmware recovery process solve your issue?

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#5
Options
Re:OC200 v1 - Simply won't upgrade to 1.26.3-Solution
2023-10-23 19:39:04 - last edited 2023-10-23 19:39:13

  @Hank21 
1 - No, controller wasn't bricked, nor even in a bad state. It simply wouldn't attempt the upgrade.

2 - Yesterday I started having lots of "slowness" that was dropped packets, even between client and all the omada components: Controller, router, direct to APs...

I methodically rebooted each one separately, and it was only after the last AP rebooted that everything was "fixed". On a hunch, I then tried the firmware update to the controller, (same exact process, no changes), and it completed first try!?!

Super weird/concerning that a misbehaving AP (that I wasn't connected through) could interfere w/ the controller like that.

Recommended Solution
  0  
  0  
#6
Options
Re:OC200 v1 - Simply won't upgrade to 1.26.3
2023-10-24 02:39:18

Hi @YATechMonkey,

 

Thanks for your updates!

 

Please keep an eye on this issue. If you have any further questions or concerns, please feel free to ask. Thank you!

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#7
Options
Re:["Solved" - ish ] OC200 v1 - Simply won't upgrade to 1.26.3
2023-10-24 02:41:55

  @YATechMonkey 

 

I eventually got mine back after about 2 hrs of trying had to revert back about 4-5 firmware version to bring it back to life with full reset and then like  previous reply it upgrade to latest firmware on first attempt.

and I was doing this via lan cable,   I've yet to reset my ap's becuase they are currently adopted with old config, guess I should have backed up, but I'm betting  if I had loaded it back in it would break.

 

  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1185

Replies: 7

Tags

Firmware Update
Related Articles
[solved] OC 200 V1.0 - "The controller does not exist."
136 0
How to upgrade OC200 to 8.5.4
1119 0
OC200 Upgrade
333 0
Missing AI WLAN Optimization Options after OC200 Upgrade to 5.11.10
1115 0
OC200 - failed to upgrade
950 0
Oc200 V1 compatibility
368 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.