Business Community > All Threads > Wireguard client connects to the tunnel but does not ping local network IP
< All Threads

Wireguard client connects to the tunnel but does not ping local network IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Wireguard client connects to the tunnel but does not ping local network IP

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Wireguard client connects to the tunnel but does not ping local network IP
Wireguard client connects to the tunnel but does not ping local network IP
2023-09-10 20:08:54
Tags: #VPN
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.2 Build 20230210 Rel.62992

I can't ping any local network IP from the client connection

 

Wireguard Server

Wireguard Server PEER

Client Configuration

 

Client connect Status OK! 

Server Wireguard PEER Status Connetions OK!

Using the OpenVPN connection, I can ping the local network IPs from OpenVPNClient, but I want to do it with Wireguard, which is much faster than the OpenVPN connection.

 

 

 

  0      
 
  0      
 
#1
Options
5 Reply
Re:Wireguard client connects to the tunnel but does not ping local network IP
2023-09-11 01:45:50

Hi @Bug_do_Ti 

Thanks for posting in our business forum.

Setup on the Windows OS peer is incorrect. AllowIPs is incorrect.

If you can take a sec to read this, would be helpful:

Configuration Guide How to Configure WireGuard VPN on Omada Controller

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:Wireguard client connects to the tunnel but does not ping local network IP
2023-09-12 13:22:25

  @Clive_A Thanks for the comment, but I've already done all the tutorials, but I can't ping any computer or device on the Wireguard server's local network

  0  
  0  
#3
Options
Re:Wireguard client connects to the tunnel but does not ping local network IP
2023-09-13 01:22:40

Hi @Bug_do_Ti 

Thanks for posting in our business forum.

Bug_do_Ti wrote

  @Clive_A Thanks for the comment, but I've already done all the tutorials, but I can't ping any computer or device on the Wireguard server's local network

Then there is nothing I can do as I can verify the WireGuard is working on several test models I have. On ER605 V2 2.1.4 BETA and 2.1.2 public release.

If you cannot access it then it is your device issue. You should at least ping the WG interface IP to verify. If that's ping-able, your computer issue. Windows firewall, Network Diagnostics ICMP IPv4, is blocked by your firewall.

I've pointed out the error I can find. You've followed the tutorial but it does not mean you've done it right. I hope I can get cooperation and useful information for troubleshooting.

Good luck.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#4
Options
Re:Wireguard client connects to the tunnel but does not ping local network IP
2023-09-16 19:14:21

  @Bug_do_Ti

I redid the configuration according to my friend's tip

 

 

 

 

Peer Connect OK

 

Connection OK but I can't ping the local network IP 192.168.0.253 from the Wireguard client. But on the local network, pinging that IP works. Using L2TP VPN I can ping IP 192.168.0.253 from the local network, but not via Wireguard VPN.

 

  0  
  0  
#5
Options
Re:Wireguard client connects to the tunnel but does not ping local network IP
2023-09-18 06:00:12

  @Bug_do_Ti 

did you set up the peer 10.0.0.1/24 as the peer allowed ip on er605? 

are you able to ping the 192.168.0.1? if yes, then it's your computer. if no, then it could be the allowed IP, not returning the icmp echo.

ScReW yOu gUyS. I aM GOinG hoMe. —————————————————————— For heaven's sake, can you write and describe your issue based on plain fact, common logic and a methodologic approach? Appreciate it.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 3855

Replies: 5

Tags

VPN
Related Articles
Vpn tunnel
494 0
Wireguard Client to Site?
182 0
ERxxxxx as Wireguard client
2148 0
Not able to start OpenVPN Client tunnel
1223 1
Tunnel IPSec vs Fortigate
1328 0
ER605 v2: is the wireguard setup for server only, or can the router be setup as a wireguard client?
3312 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.