@FMRpt 

I had something similar but in my case with an eap610, I bought 2 and with one of the APs I was able to configure client mode, but not with the other AP and it was a firmware problem, both new devices purchased in the same store had different firmware. Check that the EAP225 have updated firmware, in my particular case I could see my eap610 from the CPE710 and I could connect. After updating the firmware on the other device I can now use both for these cases. Now I have one of them in test because I read somewhere that the connection is not stable and from time to time it hangs and you have to unplug it and then it works again, let's see if the same thing happens to me or could there be another cause .

oscar99