Hello,

I have an ER605 with two WAN connections and I would like to use WAN1 for the wired network and WAN2 for WiFi.

To do this, I created VLAN 20 and configured the SSID to use VLAN 20. Additionally, I configured Policy Routing for All Protocols, WAN2, Source (Network) WiFi, and Destination IPGroup_Any.

However, I am facing a problem: when the "Use the other WAN port if the current one is down" option is unchecked, everything works fine. But when I check this option, all traffic is routed through WAN1 instead of WAN2, even if WAN2 is online.

Could I be forgetting something?

WAN1 = WAN

WAN2 = WAN/LAN1

ER605 V2 2.1.2

OC200 V1 1.21.7 Build 20221206 Rel.58608 - 5.7.6