ER605 access to WAN modem admin page
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have an ER605 load balancer managing an Archer VR400 modem connected to the WAN port and a Netgear LB2120 4GLTE modem connected to the WAN/LAN1 port. The ER605 LAN address is 192.168.0.254, the two modems are in bridge mode but they also have static LAN addresses of 192.168.1.254 (VR400) and 192.168.2.254 (LB2120).
I have two static routes on the ER605 as follows:
From the LAN side of the ER605, I can get to the LB2120 admin page at 192.168.2.254, but I get a timeout when trying to access the VR400 admin page at 192.168.1.254. I have tried three different ADSL modems (TPLink, Billion, iiNet) all with same result. It appears to be a problem with the ER605 which can route successfully to the WAN/LAN1 port but not the WAN port.
Any suggestions greatly appreciated.
