Home

Forums

Stories

Knowledge Base

Business Community > All Threads > ER605 DHCP Reservations & Pool

< All Threads

ER605 DHCP Reservations & Pool

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

ER605 DHCP Reservations & Pool

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CoKro

2023-03-07 17:26:23 - last edited 2023-04-14 04:04:48

Posts: 61

Helpful: 5

Solutions: 0

Stories: 0

Registered: 2020-02-01

ER605 DHCP Reservations & Pool

2023-03-07 17:26:23 - last edited 2023-04-14 04:04:48

Tags: #DHCP Service

Model: ER605 (TL-R605)

Hardware Version: V1

Firmware Version:

Been a while since I was messing with DHCP since the reservations weren't holding. Upgraded today to the latest beta.

Having a brain glitch. Totally silly queston. I already have roughly 30 IPs reserved for my devices and am trying to get them all back where they belong. But I have about 20 other devices that are dynamically assigned, so I'm tripping over a few.

When I define the DHCP range, and I start, say, at 192.168.0.100 to free up the other dynamically assigned devices, my reserved addresses <.100 should all still hold, correct? Meaning, when I define the range, I can still use addresses outside the range, they just wont be dynamically assigned by the DHCP Server?

OC200, 2x SG-TL3428, T1500G-10MPS, 3x EAP225, Firewalla Gold (replaced ER-605)

1 Accepted Solution

Hank21

2023-04-14 04:04:44 - last edited 2023-04-14 04:04:48

Posts: 3673

Helpful: 719

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:ER605 DHCP Reservations & Pool-Solution

2023-04-14 04:04:44 - last edited 2023-04-14 04:04:48

Hi @CoKro，

A newer 1.2.3 Beta firmware has been released for trial, please follow the post link below for details.
ER605 V1_1.2.3_Build 20230413 Beta For Trial (Released on Apr 14th, 2023)

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

Recommended Solution

6 Reply

Fae

2023-03-08 01:21:41 - last edited 2023-03-08 01:27:07

Posts: 3604

Helpful: 1360

Solutions: 474

Stories: 0

Registered: 2020-06-30

Re:ER605 DHCP Reservations & Pool

2023-03-08 01:21:41 - last edited 2023-03-08 01:27:07

Hello @CoKro

Did you upgrade to the ER605(UN)_V1_1.2.3 Build 20230224 (Beta)?

ER605 V1 1.2.0 firmware (adapted to Omada Controller 5.0.30) has added support for reserving IP addresses outside the DHCP Range. So I believe that you can configure reserved address outside the DHCP range if you use 1.2.0 or later firmware.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*

CoKro

LV2

2023-03-08 13:18:15

Posts: 61

Helpful: 5

Solutions: 0

Stories: 0

Registered: 2020-02-01

Re:ER605 DHCP Reservations & Pool

2023-03-08 13:18:15

@Fae

yes. The Feb 28th released beta. ER605(UN)_V1_1.2.3 Build 20230224 (Beta)

OC200, 2x SG-TL3428, T1500G-10MPS, 3x EAP225, Firewalla Gold (replaced ER-605)

Fae

2023-03-09 02:21:56

Posts: 3604

Helpful: 1360

Solutions: 474

Stories: 0

Registered: 2020-06-30

Re:ER605 DHCP Reservations & Pool

2023-03-09 02:21:56

Hello @CoKro

Please reconnect a client device to check whether it can get the reserved IP address as expected. You can reconnect on the client device, or go to Clients for Reconnect. Thanks!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*

CoKro

LV2

2023-03-10 18:29:18

Posts: 61

Helpful: 5

Solutions: 0

Stories: 0

Registered: 2020-02-01

Re:ER605 DHCP Reservations & Pool

2023-03-10 18:29:18

@Fae

Thanks for the help. Can confirm that its working as expected. I started my range at x.x.x.100, with all of my reserved addresses between x.x.x.10 and x.x.x.99.

Non-reserved devices are picking up IP addresses x.x.x.107 and x.x.x.113.

OC200, 2x SG-TL3428, T1500G-10MPS, 3x EAP225, Firewalla Gold (replaced ER-605)

Fae

2023-03-13 03:12:49

Posts: 3604

Helpful: 1360

Solutions: 474

Stories: 0

Registered: 2020-06-30

Re:ER605 DHCP Reservations & Pool

2023-03-13 03:12:49

Hello @CoKro

Thank you for your reply. Glad to hear that it's working as expected now.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*

Hank21

2023-04-14 04:04:44 - last edited 2023-04-14 04:04:48

Posts: 3673

Helpful: 719

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:ER605 DHCP Reservations & Pool-Solution

2023-04-14 04:04:44 - last edited 2023-04-14 04:04:48

Hi @CoKro，

A newer 1.2.3 Beta firmware has been released for trial, please follow the post link below for details.
ER605 V1_1.2.3_Build 20230413 Beta For Trial (Released on Apr 14th, 2023)

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

Information

Helpful: 0

Replies: 6

ER605 DHCP Reservations & Pool

ER605 DHCP Reservations & Pool

Information

Voters 0

Tags