Business Community > All Threads > is it possible to set up a second ER605 in Omada?
< All Threads

is it possible to set up a second ER605 in Omada?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

is it possible to set up a second ER605 in Omada?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
is it possible to set up a second ER605 in Omada?
is it possible to set up a second ER605 in Omada?
2023-02-05 00:11:26 - last edited 2023-02-21 22:14:06
Tags: #VLAN & Multi-Networks #DHCP Service #WAN Setup
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.1.1

is it possible to set up a second ER605 in Omada?

 

I have two Internet connections on two different floors (ground floor and first floor). They are completely connected by cable.

The network consists of 2x TL-SG2008P and 1x TL-SG2218 switch, 3x ERP653 and 1x ERP610 Outdoor. One connection is already connected to an ER605 and is already connected and set up. On the second connection I have already tried to take an ER605 in operation, but the Omada controller brings me only an error message that he has already registered a gateway.

Network: Controller: OC200, Switch: 2xTL-SG2008P 1xTL-SG3428, Router: ER605, AP´s: 3xERP653 1xERP610 Outdoor Wer Rechtschreb Fehler findet darf sie behalten Who finds spelling mistakes may keep them
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:is it possible to set up a second ER605 in Omada?-Solution
2023-02-08 06:50:40 - last edited 2023-02-21 22:14:06

  @weby112 

Internet;

 

See this guide:

How to configure IPSec LAN to LAN VPN for multiple subnets using the new GUI

Recommended Solution
  1  
  1  
#6
Options
5 Reply
Re:is it possible to set up a second ER605 in Omada?
2023-02-05 20:15:24

  @weby112 

 

You can have two routers on 1 site.You can create a second site and keep it adopted.  

 

But there isnt like a hot swap or a failover for the routers within the controller.  

I can not teach anyone anything - I can only make them think - Socrates
  1  
  1  
#2
Options
Re:is it possible to set up a second ER605 in Omada?
2023-02-05 20:54:25

  @KimcheeGUN can i include the VLAN from the second site in the main site? so then i could rout the trafic to the second gateway?

Network: Controller: OC200, Switch: 2xTL-SG2008P 1xTL-SG3428, Router: ER605, AP´s: 3xERP653 1xERP610 Outdoor Wer Rechtschreb Fehler findet darf sie behalten Who finds spelling mistakes may keep them
  0  
  0  
#3
Options
Re:is it possible to set up a second ER605 in Omada?
2023-02-07 05:44:00

  @weby112 

The 2nd floor network is another Internet source right?

 

If you want to link up two Router's LAN, the best solution is to build a site-to-site VPN between these two routers. 

  0  
  0  
#4
Options
Re:is it possible to set up a second ER605 in Omada?
2023-02-07 13:54:58

  @Somnus yes, in the second floor is the second source.

 

does the VPN connection go in the house internal network between the ER605 router or does the connection go externally over the internet?

Network: Controller: OC200, Switch: 2xTL-SG2008P 1xTL-SG3428, Router: ER605, AP´s: 3xERP653 1xERP610 Outdoor Wer Rechtschreb Fehler findet darf sie behalten Who finds spelling mistakes may keep them
  0  
  0  
#5
Options
Re:is it possible to set up a second ER605 in Omada?-Solution
2023-02-08 06:50:40 - last edited 2023-02-21 22:14:06

  @weby112 

Internet;

 

See this guide:

How to configure IPSec LAN to LAN VPN for multiple subnets using the new GUI

Recommended Solution
  1  
  1  
#6
Options

Information

Helpful: 0

Views: 1814

Replies: 5

Tags

VLAN & Multi-Networks DHCP Service WAN Setup
Related Articles
ER605 as a second router in network
4548 0
Set up Omada Router for small office
747 1
ER605 no Omada possible
609 0
ER605 second WAN Port is connected but doesn't go online
301 0
ER605 v2 firmware 2.1.1 DHCP not working in omada
2187 0
OMADA CONTROLLER - ADD THE ER605
207 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.