Clients connected to WIFI/EAP with out internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Clients connected to WIFI/EAP with out internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Clients connected to WIFI/EAP with out internet
Clients connected to WIFI/EAP with out internet
2022-11-27 07:49:46 - last edited 2022-12-07 00:50:45
Tags: #client connected w/out internet
Model: OC300  
Hardware Version: V1
Firmware Version: 1.13.1 Build 20220921 Rel.35923

Hi all,

 

Am having severe trouble with 2 of my sites , i have 180 Clients and Connection of 500MBps downloads , Rate limit per client is 2.1Mbps download and 700kbps upload. All clients have DHCP enable ip address.

 

I am having continuous complaints form the sites of clients connected to SSIDs but not able to get internet connection, I have been struggling with this issue for a long while now i have read multiple forums and am not able to find a solution, i have reduced the client speed and rate limits down to 1Mbps as well but still am face this issue and loads of complaint of bad internet.

 

My setup includes following :-

 

OC300 V 1.0

TL-ER7206 v1.0   1.2.3 Build 20221104 Rel.41500

2X TL-SG2428P v1.0  1.1.5 Build 20220909 Rel.75392

EAP115 and 225 and Outdoor EAP225

 

I am Sharing some screen shot of the configuration , i have removed the SSID and Rate limit names from the screen shot below.

 

Would greatly appreciate your help and response.

 

 

 

 

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:Clients connected to WIFI/EAP with out internet-Solution
2022-12-07 00:50:33 - last edited 2022-12-07 10:20:25

Solved

 

Only DNS had to be set manually under LAN settings. The client devices were getting primary DNS as gateway 10.0.0.1 and were not able to get Internet connectivity

 

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Clients connected to WIFI/EAP with out internet-Solution
2022-12-07 00:50:33 - last edited 2022-12-07 10:20:25

Solved

 

Only DNS had to be set manually under LAN settings. The client devices were getting primary DNS as gateway 10.0.0.1 and were not able to get Internet connectivity

 

Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 483

Replies: 1

Tags

client connected w/out internet
Related Articles