Business Community > All Threads > eap225-outdoor won't adopt via wireless but works fine hardwired
< All Threads

eap225-outdoor won't adopt via wireless but works fine hardwired

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

eap225-outdoor won't adopt via wireless but works fine hardwired

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
eap225-outdoor won't adopt via wireless but works fine hardwired
eap225-outdoor won't adopt via wireless but works fine hardwired
2022-09-06 08:15:05 - last edited 2022-09-08 18:46:32
Tags: #Mesh #adopt
Model: EAP225-Outdoor  
Hardware Version: V3
Firmware Version: 5.0.8 Build 20220613 Rel. 51936(4341)

My Current setup is;

- OC200 V1 5.4.7 FW 1.18.3 Build 20220715 Rel.56221

- 2 EAP245(US) 3.0 FW 5.0.8 (1 is root AP and the other is mash connected)

 

when I power up the EAP225-outdoor with just power, the OC200 doesn't see it, if I hardline it into the network, it shows up

when it does show up, the model is wrong, EAP225-Outdoor(Canada) v3.0[Custom], I've confirmed that it is the US model, not the canadian model

 

I'm assuming that's what is causing the issue but I haven't found a way around it in my googling and such, I did put a ticket into tp-link but they haven't gotten back to me yet.

 

Not sure what other info would be helpful or relevant at this point.

 

And yes I am in Canada

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:eap225-outdoor won't adopt via wireless but works fine hardwired-Solution
2022-09-08 18:45:59 - last edited 2022-09-08 18:46:32

  @screagle So I discovered what the true issue was....the EAP225-OUTDOOR only goes down to channel 149...so you need to set the root AP to use one of the frequencies supported by the EAP225-OUTDOOR otherwise it can't be adopted...

Recommended Solution
  1  
  1  
#6
Options
5 Reply
Re:eap225-outdoor won't adopt via wireless but works fine hardwired
2022-09-06 10:32:45

  @screagle 

 

Just a quick thought, have you enabled MESH under settings?   This needs to be enabled to allow APs to adopt via WiFi

 

Its under Settings > Site >  tick advanced features, in there..   sorry working from memory!! 

  0  
  0  
#2
Options
Re:eap225-outdoor won't adopt via wireless but works fine hardwired
2022-09-06 21:07:00

  @Philbert Yeah it's turned on, I've been using the mesh with 2 eap245's for a while now.

  0  
  0  
#3
Options
Re:eap225-outdoor won't adopt via wireless but works fine hardwired
2022-09-06 21:36:44

  @screagle This is what I see when I have the new access points hardwired, they're being identified as canada even though they are US labeled items

 

  0  
  0  
#4
Options
Re:eap225-outdoor won't adopt via wireless but works fine hardwired
2022-09-07 08:30:54

  @screagle 

 

It may be more accurate to compare MAC addresses directly, sometimes what is marked on the label and what is shown on the actual product do not match, but in general, the MAC as a unique sign of the device is sure to match.

Just striving to develop myself while helping others.
  0  
  0  
#5
Options
Re:eap225-outdoor won't adopt via wireless but works fine hardwired-Solution
2022-09-08 18:45:59 - last edited 2022-09-08 18:46:32

  @screagle So I discovered what the true issue was....the EAP225-OUTDOOR only goes down to channel 149...so you need to set the root AP to use one of the frequencies supported by the EAP225-OUTDOOR otherwise it can't be adopted...

Recommended Solution
  1  
  1  
#6
Options

Information

Helpful: 0

Views: 969

Replies: 5

Tags

Mesh
adopt
Related Articles
Adopt loop with EAP225-Outdoor
466 0
Extend a EAP225-Outdoor Wired to a EAP225-Outdoor Wireless to extend Mesh without cables....
534 0
2 EAP225-Outdoor in MESH?
916 0
EAP225 Outdoor configuration without lan connection
587 0
Cant adopt first EAP225-outdoor
351 0
eap225-outdoor
578 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.