VPN lan to lan not ping

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VPN lan to lan not ping

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VPN lan to lan not ping
VPN lan to lan not ping
2022-07-22 15:48:58 - last edited 2022-10-21 07:43:04
Tags: #VPN
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.0.1 Build 20220223 Rel.68551

Hi,

 

I've 2 ER605 installed on 2 different offices (office P subnet 192.168.1.0, office M subnet 192.168.0.0) of my clients. The devices are configured to connect together via IPSEC VPN. Each device are beyond ad ADSL router configured to set the DMZ to the ER605.

The VPN is connected but I can't ping in any directionsn where is the problem ?

Many thanks

 

trik84

 

  0      
  0      
#1
Options
1 Accepted Solution
Re:VPN lan to lan not ping -Solution
2022-09-03 15:21:42 - last edited 2022-10-21 07:43:04

  @trik84 

 

this is not so strange :-) the firewall in the PC blocks remote networks, configure a firewall rule and allow remote networks on the PCs

 

 

Recommended Solution
  0  
  0  
#4
Options
4 Reply
Re:VPN lan to lan not ping
2022-07-25 07:11:15

Dear @trik84,

 

trik84 wrote

The VPN is connected but I can't ping in any directionsn where is the problem ?

 

It's usually caused by the firewall settings on the clients, you may check the firewall on both sides.

 

On the ER605 router, ensure "Block Ping from WAN" is unchecked under Firewall -> Attack Defense.

On the clients such as a Windows PC, disable Windows firewall in both sides and try to ping again.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:VPN lan to lan not ping
2022-09-03 09:12:38 - last edited 2022-10-21 07:43:12

  @Fae 

Hi, sorry for the late reply . . .
I've unchecked "Block Ping from WAN" from both routers and nothing changes.

So I've tried to disconnect and reconnect the VPN, and than I can ping but only some devices.
The situation is very stranger, for example from office M i can ping the network printer located in office P, I can enter in it's web interface via browser and i can print.

But I can't ping the PC or i can't see shared SMB folders of PC.

In the same subnet I can ping PC and I can access to shared folders.

In office P I can ping and access to shared folders of every PC in the office network, and the same in office M, but i can't do the same across the 2 offices.

 

What could'be the issue ?

 

Many Thanks and best regards

  0  
  0  
#3
Options
Re:VPN lan to lan not ping -Solution
2022-09-03 15:21:42 - last edited 2022-10-21 07:43:04

  @trik84 

 

this is not so strange :-) the firewall in the PC blocks remote networks, configure a firewall rule and allow remote networks on the PCs

 

 

Recommended Solution
  0  
  0  
#4
Options
Re:VPN lan to lan not ping
2022-10-21 07:41:28 - last edited 2022-10-21 07:43:01

  @shberge
. . . great !!! I was so stupid, i was focused on VPN configuration and I forgot the integrated firewall on the pc.

 

Every thing works now !!!

 

Many thanks shberge

 

  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1720

Replies: 4

Tags

Related Articles