“Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Fixed IP for current MAC address is still not working.
Omada Controller Version is 4.4.8
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Dear @Stanleek,
Stanleek wrote
Fixed IP for current MAC address is still not working.
Sorry for any trouble caused. After further troubleshooting and investigation, the R&D team has finally addressed the issue.
The following solution post has provided the Beta firmware to fix the issue (other beta firmware will be provided gradually).
Solution ER605 ER7206 - “Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect
Thank you all for your huge support and patience!
- Copy Link
- Report Inappropriate Content
Stanleek wrote
Fixed IP for current MAC address is still not working.
Omada Controller Version is 4.4.8
Hi @Stanleek
May I know the device model that you are doing fixed IP address? Is that a mobile phone/laptop or a camera?
Could you please check the MAC address of the device(on itself label) if it is the same one as under Controller Settings-->Service->DHCP Reservation list?
1. Please disable the "Dynamic MAC“ or "Privacy Address" feature if the device support;
2. Please share more details about your client devices' model and the network settings you've done, so we can do further research.
- Copy Link
- Report Inappropriate Content
@Stanleek Have you tried old firmware V1.2.0? I saw some posts mentioned that the problem only happens once they update to V1.2.1 firmware
- Copy Link
- Report Inappropriate Content
Where can I find Reservaltion list in Omada? It is not here as you wrote,
This device is Windows 10 PC:
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @Stanleek
My bad. Please upgrade your controller version that may fix the issue. The current controller version for windows is V5.4.6
- Copy Link
- Report Inappropriate Content
Dear @Stanleek,
Stanleek wrote
Fixed IP for current MAC address is still not working.
Sorry for any trouble caused. After further troubleshooting and investigation, the R&D team has finally addressed the issue.
The following solution post has provided the Beta firmware to fix the issue (other beta firmware will be provided gradually).
Solution ER605 ER7206 - “Use Fixed IP Address” (DHCP Reservation) Doesn't Take Effect
Thank you all for your huge support and patience!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 911
Replies: 7
Voters 0
No one has voted for it yet.