@Magnus33 

Mesh setup can broadcast as many SSIDs as you wish

Therefore if you have 3x APs and 2x SSIDs, you can have both SSIDs broadcast on the entire mesh... or  using the controller override this and disable specific SSIDs on the devices.

However.. i have no idea how disabling broadcast of an SSID on a device might affect the mesh, more than likely the upstream node (master node) may require the same SSID to operate

@Magnus33 

Will the third EAP connect to a switch/router via cable? If it has Ethernet connection, mesh has no meaning as it's for wireless deployment. If you want to give it a different SSID, just use SSID override

@Somnus 

That worked perfectly altough i suspect a few people are now confused why there is a smart-tolet8000 now howing up online ;)