CPE510 - Client Mode - Wireless connections fail to authenticate
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I have setup 2 CPE510 utilizing the basic setup guide provided from TP-Link.
One unit is set to AP Mode the other unit is set to Client.
I have locked the client to the AP.
Each unit has been assigned a static IP within the network. With the AP connected to the LAN and the Client powered on, but not physically connected, I am able to utilize the wired connection from my laptop on the LAN to ping both devices. I am also able to manage both devices from the LAN connection. When I attempt connect a wireless device to the SSID provided by the CPE510 i recieve a "connection failed to authenticate".
I am utilizing WPA-PSK/WPA2-PSK security Method.
Max Stream is enabled
AES is selected for WiFi protocol
WDS is Disabled
I have set a gateway IP on the network tab anlong with DNS address.
I am unsure what the issue is. Suggestions?
