OpenVPN issue OC200 Controller

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OpenVPN issue OC200 Controller

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
OpenVPN issue OC200 Controller
OpenVPN issue OC200 Controller
2021-04-26 16:01:46
Model: OC200  
Hardware Version: V1
Firmware Version: v4.2.11

I am fairly new to the OC200 and am trying to set up OpenVPN. I have set up the server-side of things fine and loaded up the resulting .ovpn file on my iOS client - which I know works as I have a number of other working VPN profiles set up, including one that points at my old router (a Linksys WRT3200ACM device).

 

There is one slight complication in my network in that I am double NATTED, but I have port forwarding on the external router for UDP 1194. This is how I was set up before with the LinkSys running the OpenVPN server. I see the following in the log file on the client device (iPhone 12, IoS 14.4.2). I had to edit the .ovpn file to put the correct external IP address in. The stuff in bold seems to be the error .. what on earth is linksys doing in there?

 

Any ideas, anyone? I am WAAAY out of my depth!

 

2021-04-26 16:15:20 1

2021-04-26 16:15:20 ----- OpenVPN Start -----
OpenVPN core 3.git::58b92569 ios arm64 64-bit

2021-04-26 16:15:20 OpenVPN core 3.git::58b92569 ios arm64 64-bit

2021-04-26 16:15:20 Frame=512/2048/512 mssfix-ctrl=1250

2021-04-26 16:15:20 UNUSED OPTIONS
4 [nobind]
7 [resolv-retry] [infinite]
9 [persist-key]
10 [persist-tun]

2021-04-26 16:15:20 EVENT: RESOLVE

2021-04-26 16:15:20 Contacting [88.98.225.243]:1194/UDP via UDP

2021-04-26 16:15:20 EVENT: WAIT

2021-04-26 16:15:20 Connecting to [X.X.X.X]:1194 (X.X.X.X) via UDPv4 <-- MY CORRECT EXTERNAL IP ADDRESS

2021-04-26 16:15:20 EVENT: CONNECTING

2021-04-26 16:15:20 Tunnel Options:V4,dev-type tun,link-mtu 1558,tun-mtu 1500,proto UDPv4,comp-lzo,cipher AES-128-CBC,auth SHA1,keysize 128,key-method 2,tls-client

2021-04-26 16:15:20 Creds: UsernameEmpty/PasswordEmpty

2021-04-26 16:15:20 Peer Info:
IV_VER=3.git::58b92569
IV_PLAT=ios
IV_NCP=2
IV_TCPNL=1
IV_PROTO=2
IV_LZO_STUB=1
IV_COMP_STUB=1
IV_COMP_STUBv2=1
IV_AUTO_SESS=1
IV_GUI_VER=net.openvpn.connect.ios_3.2.3-3760
IV_SSO=openurl


2021-04-26 16:15:20 VERIFY FAIL: depth=1, /C=US/ST=CA/L=Irvine/O=Linksys/OU=Belkin/CN=Mamba/name=BlackMamba/emailAddress=support@linksys.com [self signed certificate in certificate chain]

2021-04-26 16:15:20 Transport Error: OpenSSLContext::SSL::read_cleartext: BIO_read failed, cap=2576 status=-1: error:1416F086:SSL routines:tls_process_server_certificate:certificate verify failed

2021-04-26 16:15:20 EVENT: CERT_VERIFY_FAIL OpenSSLContext::SSL::read_cleartext: BIO_read failed, cap=2576 status=-1: error:1416F086:SSL routines:tls_process_server_certificate:certificate verify failed [ERR]


2021-04-26 16:15:20 Raw stats on disconnect:
  BYTES_IN : 2365
  BYTES_OUT : 339
  PACKETS_IN : 4
  PACKETS_OUT : 3
  SSL_ERROR : 1

2021-04-26 16:15:20 Performance stats on disconnect:
  CPU usage (microseconds): 25268
  Network bytes per CPU second: 107012
  Tunnel bytes per CPU second: 0

2021-04-26 16:15:20 EVENT: DISCONNECTED

2021-04-26 16:15:20 Raw stats on disconnect:
  BYTES_IN : 2365
  BYTES_OUT : 339
  PACKETS_IN : 4
  PACKETS_OUT : 3
  SSL_ERROR : 1
  CERT_VERIFY_FAIL : 1

2021-04-26 16:15:20 Performance stats on disconnect:
  CPU usage (microseconds): 29524
  Network bytes per CPU second: 91586
  Tunnel bytes per CPU second: 0
 

 

 

 

 

  0      
  0      
#1
Options
1 Reply
Re:OpenVPN issue OC200 Controller
2021-04-26 16:36:38

@patmolloy 

 

Hey

 

It looks like your Linksys is trying to handle the VPN connection itself rather than port forwarding it.

 

You say you have configured the OPenVPN on the OC200?   Do you have a gateway (TL-R605 ) to handle the VPN config?   You cant vpn into the OC200, its just a controller.

 

  0  
  0  
#2
Options

Information

Helpful: 0

Views: 1394

Replies: 1

Related Articles