Business Community > All Threads > Issue with EAP-225 Outdoor, never detected by OC200 controller.
< All Threads

Issue with EAP-225 Outdoor, never detected by OC200 controller.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Issue with EAP-225 Outdoor, never detected by OC200 controller.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Issue with EAP-225 Outdoor, never detected by OC200 controller.
Issue with EAP-225 Outdoor, never detected by OC200 controller.
2021-01-17 17:09:09 - last edited 2021-01-19 21:28:30
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 5.0.0

Hi,

 

I have a network with 3 APs (wired 1x 225-Outdoor , wired 2x EAP245v3 and OC200 controller) and I want to join another EAP-225 Outdoor with Mesh to make a bridge.

 

I've followed every instructions in the manual nothing works. (https://static.tp-link.com/2020/202012/20201223/1910012926-Omada%20SDN%20Controller%204.2.4-User%20Guide.pdf)

 

Last resort: I've factory reset the EAP-225 Outdoor but cannot be found by the controller UNLESS I am wired.

 

According to the manual I am supposed to see this :

 

 

However no matter how long I wait I never see this. All my other APs are running fine for years with the controller.

 

The 225-Outdoor I am trying to join wirelessly is within 10 meters of each Root AP. It is not out of range.

 

I've deleted my whole site and factory reset the OC200 controller. Redid all the site parameters by hand. Re-adopted all 3 APs. Network is fine but it still cannot detect the 225-Outdoor wirelessly. 

 

If I connect to the temporarily wifi (just after a factory reset) on the 225-outdoor even Omada Phone App cannot find it. Green LED is slowly flashing.

 

 

What could be the problem ?

 

It's driving me nuts.

 

Thank you!

Laurent

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Issue with EAP-225 Outdoor, never detected by OC200 controller.-Solution
2021-01-19 07:49:06 - last edited 2021-01-19 21:28:30

Dear @LBel,

 

Similar post discussed HERE.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#5
Options
6 Reply
Re:Issue with EAP-225 Outdoor, never detected by OC200 controller.
2021-01-17 20:35:01

@LBel 

 

Hey

 

Can you confirm what version of the SDN Controller software is running on the OC200?

 

I know is quite a recent addition so you will likely need SDN software version 4.2.4 or 4.2.8

 

 

  0  
  0  
#2
Options
Re:Issue with EAP-225 Outdoor, never detected by OC200 controller.
2021-01-17 20:53:13 - last edited 2021-01-17 21:03:13

@Philbert 

 

Thanks for the reply

 

Controller Version:

4.2.8

Model:

OC200 1.0

Firmware Version:

1.7.3 Build 20201119 Rel.63433

 

 

 

Problematic EAP:

 

EAP225-Outdoor(Canada) v1.0

Firmware Version:

5.0.0 Build 20201015 Rel. 54720

  0  
  0  
#3
Options
Re:Issue with EAP-225 Outdoor, never detected by OC200 controller.
2021-01-19 05:12:28 - last edited 2021-01-19 05:13:52

@LBel 

 

Does someone have a better manual/procedure to make mesh networking work?

I've tried almost every way and I'm out of ideas.

 

Thanks!

Laurent

  0  
  0  
#4
Options
Re:Issue with EAP-225 Outdoor, never detected by OC200 controller.-Solution
2021-01-19 07:49:06 - last edited 2021-01-19 21:28:30

Dear @LBel,

 

Similar post discussed HERE.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
Recommended Solution
  0  
  0  
#5
Options
Re:Issue with EAP-225 Outdoor, never detected by OC200 controller.
2021-01-19 21:30:52
Thank you thank you! I didn't think of the mismatched frequencies between US and CAN device. In my case only channel 149 and upward was selectable. Maybe a good idea to update your userguide about mismatched region. Amazon Canada shipped a 2x EAP245 (US) and a EAP225-Outdoor (CAN).
  0  
  0  
#6
Options
Re:Issue with EAP-225 Outdoor, never detected by OC200 controller.
2021-01-20 03:59:43

Dear @LBel,

 

Thank you thank you! I didn't think of the mismatched frequencies between US and CAN device. In my case only channel 149 and upward was selectable. Maybe a good idea to update your userguide about mismatched region. Amazon Canada shipped a 2x EAP245 (US) and a EAP225-Outdoor (CAN).

 

Welcome and glad to hear that your concern was resolved finally. 

 

Thank you for your thoughtful advice, I've forwarded this to the document team who will modify the FAQ-2949. 

 

Appreciate your support and trust on TP-Link products!

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 1408

Replies: 6

Related Articles
EAP 225-Outdoor mesh issue
605 0
eap 225 outdoor in disconnect status
692 0
EAP-225 Outdoor keeps disconnecting
4564 0
TP link EAP 225 outdoor
912 0
making EAP 225 outdoor secure
1217 0
Eap 225 outdoor max user
558 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.