Home

Forums

Stories

Knowledge Base

Business Community > All Threads > OMADA OC200 SNMP problem

< All Threads

OMADA OC200 SNMP problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

OMADA OC200 SNMP problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Mikolaj

2021-01-07 09:17:07 - last edited 2021-01-12 09:25:36

Posts: 13

Helpful: 2

Solutions: 1

Stories: 0

Registered: 2019-12-09

OMADA OC200 SNMP problem

2021-01-07 09:17:07 - last edited 2021-01-12 09:25:36

Model: OC200

Hardware Version: V1

Firmware Version: 1.7.3 Build 20201119 Rel.63433

Hi,

I am having a problem with setting up SNMP communication.

Settings > Services > SNMP > SNMPv1 & SNMPv2c set to ON

Community String set.

Device does not respond.

Tried from my PC with Paessler SNMP Tester. Bad result with SNMP v2:

Same with SNMP v1:

It is not a case of firewall. I can test other devices in my network from the same PC. SMTP OC200 does not work also with me monitoring system (checkmk).

Will be glad 4 any help

BR
Mikolaj

1 Accepted Solution

Alex

LV1

2021-01-07 23:39:55 - last edited 2021-01-12 09:25:36

Posts: 17

Helpful: 12

Solutions: 2

Stories: 0

Registered: 2018-09-13

Re:OMADA OC200 SNMP problem-Solution

2021-01-07 23:39:55 - last edited 2021-01-12 09:25:36

@Mikolaj that setting only enables SNMP on switches, routers and AP's not the OC200. If you do an snmpwalk on an EAP or switch IP you should get a response.

Example:

# snmpwalk -v 2c 192.168.0.5 -c public iso.3.6.1.2.1.1.1.0

iso.3.6.1.2.1.1.1.0 = STRING: "Linux EAP245 3.3.8 #1 Fri Sep 18 16:46:11 CST 2020 mips"

Recommended Solution

3 Reply

Mikolaj

LV1

2021-01-07 12:19:07

Posts: 13

Helpful: 2

Solutions: 1

Stories: 0

Registered: 2019-12-09

Re:OMADA OC200 SNMP problem

2021-01-07 12:19:07

@Mikolaj

Performed the test of OC200 open ports.

Result: there are only 3 ports open: 80, 443 and 8088.

So SNMP is not open. Additionally I have enabled SSH on WLC GUI.

Port 22 Ii is not open either !

Where is the problem ?

Alex

LV1

2021-01-07 23:39:55 - last edited 2021-01-12 09:25:36

Posts: 17

Helpful: 12

Solutions: 2

Stories: 0

Registered: 2018-09-13

Re:OMADA OC200 SNMP problem-Solution

2021-01-07 23:39:55 - last edited 2021-01-12 09:25:36

@Mikolaj that setting only enables SNMP on switches, routers and AP's not the OC200. If you do an snmpwalk on an EAP or switch IP you should get a response.

Example:

# snmpwalk -v 2c 192.168.0.5 -c public iso.3.6.1.2.1.1.1.0

iso.3.6.1.2.1.1.1.0 = STRING: "Linux EAP245 3.3.8 #1 Fri Sep 18 16:46:11 CST 2020 mips"

Information

Helpful: 0

Replies: 3

OMADA OC200 SNMP problem

OMADA OC200 SNMP problem

Information

Voters 0

Tags