Business Community > All Threads > VPN Client to Lan on multiple subnet
< All Threads

VPN Client to Lan on multiple subnet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

VPN Client to Lan on multiple subnet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
VPN Client to Lan on multiple subnet
VPN Client to Lan on multiple subnet
2020-07-17 12:22:32 - last edited 2021-04-22 13:37:45
Model: TL-R600VPN  
Hardware Version: V4
Firmware Version: 4.0.2 Build 20180126 Rel.54530

Hi All,

 

I have one router 600VPN and one switch 2600G-28TS with 3 different vlan and subnet.

I configured L2TP and user on vlan 1 and it works properly and I am able to reach other client on vlan 1  from vpn.

 

When I try to connect via vpn with user created on vlan 10, I am still able to go on internet (I configured properly multinet nat, static route and dhcp server on both devices) but I am not able to reach the clients on vlan 10 in the LAN.

 

What I am missing?

I use vpn client Windows 10.

Thanks

Best Regards

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:VPN Client to Lan on multiple subnet-Solution
2020-07-23 09:56:37 - last edited 2021-04-22 13:37:45

Hi,

 

I have resolved.

 

I created 3 different VPN IP Pools different to the vlan addresses and then created the 3 VPN users on a local subnet.

I also added the new subnet on Multinet NAT configuration and It worked.

 

Thanks for the support

Best Regards


 

Recommended Solution
  0  
  0  
#5
Options
4 Reply
Re:VPN Client to Lan on multiple subnet
2020-07-20 11:13:30 - last edited 2021-04-19 10:52:17

Hi,

nobody can help me on this?

I can provide more info about the scenario if you need it...

Thanks

  0  
  0  
#2
Options
Re:VPN Client to Lan on multiple subnet
2020-07-20 15:13:59 - last edited 2021-04-19 10:52:17

@Emitplink 

 

Hello, 

 

I would suggest you update the firmware before you try further steps.

https://www.tp-link.com/en/support/download/tl-r600vpn/#Firmware

 

  0  
  0  
#3
Options
Re:VPN Client to Lan on multiple subnet
2020-07-20 15:16:21 - last edited 2021-04-19 10:52:17

@Yannie 

 

Ok, I'm going to upgrade the fw.

Btw I don't think is related to the fw upgrade, probably I missing something in vpn configuration or static route on swith/router....

 

thanks

  0  
  0  
#4
Options
Re:VPN Client to Lan on multiple subnet-Solution
2020-07-23 09:56:37 - last edited 2021-04-22 13:37:45

Hi,

 

I have resolved.

 

I created 3 different VPN IP Pools different to the vlan addresses and then created the 3 VPN users on a local subnet.

I also added the new subnet on Multinet NAT configuration and It worked.

 

Thanks for the support

Best Regards


 

Recommended Solution
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 1243

Replies: 4

Related Articles
VPN "lan-to-lan" vs "client-to-lan"
400 1
LAN client to Remote Subnet server Routing by way of VPN
493 0
TL-R600VPN multiple IPSec Client-to-LAN
4430 0
How to set up L2TP client to LAN VPN
1091 0
VPN client to LAN-to-LAN routing
434 0
How do I give a VPN client access to multiple subnets inside my network?
1006 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.