Hello Poeple,

I'm really stuck because I can't use this router like a conventional nat router! For a temporary application, I would have liked to use it to access from the WAN port to a single device connected to one of these LAN ports. NAT (virtual server) should do the trick but it doesn't seem to work! here is the aspected diagram:

I have two completely independent networks. the first network is in the range 192.168.0.0/24 and the second is in 192.168.20.0/24. Each network has its own ISP and therefore each has a different modem. From the first network from the machine 192.168.0.123, I want to access the ip address 192.168.20.221 on the for 8080. For this, I added a virtual server on port 8080 with the internal address in 192.168.20.221 . The router at address 192.168.0.15 in WAN and 192.168.20.248 in LAN.

During the connection test, when on the machine 192.168.0.123 I try to access 192.168.0.15:8080, I am not redirected to the web page of 192.168.20.221:8080! I dont know why this is not working. I've configured rule of virtual server with port 8080 and 192.168.20.221 as internal server ip.

So I connected my first network to the WAN socket and the second network to one of the LAN sockets (I took care to deactivate the DHCP server from the LAN network in the TL-R600).

I can't get the router to work as expected! Can someone help me finish my setup?