Business Community > All Threads > connection error
< All Threads

connection error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

connection error

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
connection error
connection error
2020-04-02 19:25:30 - last edited 2020-04-02 19:31:35
Model: CPE510  
Hardware Version: V3
Firmware Version: 2.2.0 Build 20190125 Rel. 36276 (5553)

Hello, I have a problem, buy 2 CPE510 to connect two houses, which are at a distance of 0.87 km, I already configured one as an access point and the other as a client, but I cannot have a connection between them, I need help, they are both in the roof of the house, there are trees between them but I don't have a connection between them that I can do, this is the scene where I want to install them: https://drive.google.com/open?id=19Sl0NQa7iUKxi0MOIMxfVdbDZbVRaekA&usp=sharing

 

I need help please

  0      
 
  0      
 
#1
Options
3 Reply
Re:connection error
2020-04-02 22:30:46 - last edited 2020-04-02 22:31:09

@PERCY, do you mean you have the CPEs in the roof or on top of the roof?

 

In general, a directional link needs a fresnel zone clearance. The first fresnel zone must be kept free from all obstructions to avoid interfering with the radio reception. Trees in between the link are obstacles, especially for 5 GHz EM waves.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#2
Options
Re:connection error
2020-04-02 23:44:44
I understand, what teams recommend me to be able to make this connection?
  0  
  0  
#3
Options
Re:connection error
2020-04-03 13:16:37

@PERCY, I recommend setting up the link in the lab before mounting the CPEs on top of the roof. This way, you just have to align the CPE's antennas using the Antenna Alignment Tool. Try to find a mount position with free line of sight and use planning tools such as UBNT's AirLink calculator to find the ideal height over ground to ensure a 60% fresnel zone clearance.

 

As for the CPE's settings, use

  • 802.11n-only wireless mode,
  • 20/40 MHz channel width (20 MHz-only if there are too many interferences),
  • MAXtream TDMA disabled,
  • distance setting either the real distance + 0.1km or »Auto« setting to let the CPEs find out.

 

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 687

Replies: 3

Related Articles
ppoe connection error
648 0
cpe510 web server error
1394 0
Connection error - Dead / null connection
752 0
Adopt-Error and Connection-Problem
494 0
PPTP Connection receiving error
2282 0
ER7412-M2 ppoe error connection and slow speed upload
110 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.