I am a noob and have no networking experience. I just need some pointers on what settings I need to change to make these work.

I have one 510 set up as access point, the network cable connected to it has a speed of 170 mbps download and a 170 mbps upload. I have a second 510 set up as a client, when I connect to the cable I get 60 mbps download and 60 mbps upload. When I connect that cable to a Google Wifi puck I get 60 mbps down and 60 mbps up within the Google app.  When hardwire to the second port on the Google Wifi puck I get 60 mbps up and down. when I connect to the Google Wifi puck wirelessly I get .5 mbps down and around 16 mbps upload.

I was briefly able to get the Wi-Fi puck to broadcast at a higher speed (50 mbps down and up) by changing the IP address of the access point and the client to the same as the router the access point is attached to.  It didn’t last though.

From all my playing around with it it seems like the Google Wi-Fi router is not able to communicate properly with the router that’s connected to the access point. I’ve connected the Google Wifi router directly to the main router (that the access point is attached to) and everything works fine. It’s just when I put the two CPE 510’s in between that it has an issue.

How do I set these CPE 510s up so that I can connect a google Wi-Fi mesh router to the client and have it work?

Thanks in advance.