I have had nothing but issues with this setup 

was hoping someone could help 

it’s gotta be something I’m doing wrong 

 

I have as follows 

 

1. Internet (head-end) with a 

CPE-510 plugged into router and mounted on the side of the home (set up as an access point)

 

2. At this same location I have a EAP-225 installed for Wi-Fi coverage on that side of the home (set up as AP)

 

3. About 100ft away, in line of site 

another CPE-510 (set up as a Client) 

 

4. At #3 same location I have another EAP-225 set up as AP for Wi-Fi coverage in that area 

 

5. At #3 same location I have another CPE-510 (set up as an Access point) 

 

note: all three of these devices are plugged into a 5port ethernet gigabyte switch ..

 

6. About 200ft away in line of site I have another CPE-510 (set up as a client) 

 

7. At #6 same location I have another EAP-225 (set up as an AP) for Wi-Fi coverage in this area 

 

note: at this location I have an 8 port gigabyte switch with both of those devices plugged in as well as 2 DVR’s that are networked for remote viewing 

 

8. Also plugged into that switch in another CPE-510 setup and an AP

 

shooting about 60ft to 

 

9. Another CPE-510 set up as a client and plugged into a switch where I have a laptop and a Sonos play 5 plugged into it as well 

 

nothing ever seems to work properly 

maybe i over installed 

maybe not setup properly 

 

please, if anyone else works with these products let me know 

I will be happy to pay u for ur time 

 

as you most likely know , tech support is not really an option so I’m hoping to get help here 

 

thank you in advance