Home

Forums

Stories

Knowledge Base

Business Community > All Threads > CPE 210/510 how to discover

< All Threads

CPE 210/510 how to discover

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CPE 210/510 how to discover

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

CCTV_TOPOLOGY

2022-03-15 08:19:37 - last edited 2022-03-17 10:31:47

Posts: 3

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-03-12

CPE 210/510 how to discover

2022-03-15 08:19:37 - last edited 2022-03-17 10:31:47

Model: CPE510

Hardware Version:

Firmware Version:

Hi All I have few questions to clarify on tplink CPE's 210/510. 1) How to discover CPE's ? We are Unable to find the list of 'CPE's and IP address' in already running project, those are installed a year back. We try to discover thru PharOS, Advanced IP tool and existing router (client list).......Please advise! 2) How to configure CPE's Remote Administration on browser login. 3) Just configure CPE510, SSID broadcast is enabled, Maxstream is disabled. However, My laptop(Windows8), my Mobile( Resmi 5A) is not displaying SSID.... please explain where is the issue? 4) Please explain using Google maps How to align CPE's LOS ( AP to Client) How to add AP, client devices icons on Google map. Regards Venu Gopal 949232 1991

1 Accepted Solution

Hank21

2022-03-16 01:22:07 - last edited 2022-03-17 10:31:47

Posts: 3673

Helpful: 719

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:CPE 210/510 how to discover -Solution

2022-03-16 01:22:07 - last edited 2022-03-17 10:31:47

@CCTV_TOPOLOGY

Hello and welcome.

1. Make sure you connect the CPE locally. You gotta need a direct connection then you can try the local IP 192.168.0.254 which is the default.

How to Configure the Access Point Mode on the Pharos device?

How to login to the Pharos-Series’ web management page?

If you've done steps right and still unable to log in with the default IP(if you changed and forgot), you have to reset the CPE. Press and hold the reset button on the actual antenna(located next to the ETH port).

2. If you want to set up the remote login, go to Management > Web Server > Remote login IP address(only applies to the AP client router/AP router)

BTW, when you set up AP and client, each will get an IP from the DHCP server. If you want to define their IP to a specific IP and make it easy for management, you set up their IP to static instead of using Dynamic IP.

3. If you don't configure CPE, CPE(by default factory settings) won't do anything. You have to log in locally to select the operation mode to make it work.

In other cases, if you have configured: Why are my devices not detecting the SSID of CPE/WBS in AP mode?

4. Please refer to the videos for further instructions.

Setup videos

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

Recommended Solution

1 Reply

Hank21

2022-03-16 01:22:07 - last edited 2022-03-17 10:31:47

Posts: 3673

Helpful: 719

Solutions: 497

Stories: 8

Registered: 2021-12-13

Re:CPE 210/510 how to discover -Solution

2022-03-16 01:22:07 - last edited 2022-03-17 10:31:47

@CCTV_TOPOLOGY

Hello and welcome.

1. Make sure you connect the CPE locally. You gotta need a direct connection then you can try the local IP 192.168.0.254 which is the default.

How to Configure the Access Point Mode on the Pharos device?

How to login to the Pharos-Series’ web management page?

2. If you want to set up the remote login, go to Management > Web Server > Remote login IP address(only applies to the AP client router/AP router)

3. If you don't configure CPE, CPE(by default factory settings) won't do anything. You have to log in locally to select the operation mode to make it work.

In other cases, if you have configured: Why are my devices not detecting the SSID of CPE/WBS in AP mode?

4. Please refer to the videos for further instructions.

Setup videos

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*

Information

Helpful: 0

Replies: 1

CPE 210/510 how to discover

CPE 210/510 how to discover

Information

Voters 0

Tags