T1600g-28ts vlan
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
T1600g-28ts vlan
Model :
Hardware Version :
Firmware Version :
ISP :
Hi Guys,
having some problems to configure my VLAN network - First what for products do i use?
1 . Fritzbox 6490 cable for calling and Internet - fixed IPv4
2. ASUS RT-N66U - DNS Server, DHCP Server Firewall OPEN VPN support
3. T1600-28TS
4. EAP 110 ground Floor
5. EAP 110 1st floor
What is my aim?
Having a simple Network seperated in "private" and "friends and familiy" supported by the EAP 110.
Port 5 and 17 > EAP 110
Port 24 > ASUS Router
What did i do?
1. The T1600-28TS default set up is "VLAN 1" > all ports untagged
2. Creating "Guest" VLAN "101"
3. Logging in to EAP Controller Setting Up the SSIDs and VLANs
a.) SSID: Enigma Wireless VLAN ID: 1
b.) SSID: Enigma-Guest Wireless WLAN ID: 101
c.) Management > Mangement VLAN > ID 1
SUCCESS => My EAPs are not reachable anymore...
4. VLAN 1 Editing => Setting Ports 5 and 17 to tagged
=> SUCCESS > My EAPs can be reached and pinged! => VLAN is working and IDs are on the way! CORRECT?
5. VLAN 101 Editing > Setting Ports 5 and 17 to tagged AND Port 24 to untagged
FAILURE > My devices cannot allocate/obtain an IP... they are always trying to connect but it won't work... Any Ideas what i made wrong?
Regards
Magnus
Hardware Version :
Firmware Version :
ISP :
Hi Guys,
having some problems to configure my VLAN network - First what for products do i use?
1 . Fritzbox 6490 cable for calling and Internet - fixed IPv4
2. ASUS RT-N66U - DNS Server, DHCP Server Firewall OPEN VPN support
3. T1600-28TS
4. EAP 110 ground Floor
5. EAP 110 1st floor
What is my aim?
Having a simple Network seperated in "private" and "friends and familiy" supported by the EAP 110.
Port 5 and 17 > EAP 110
Port 24 > ASUS Router
What did i do?
1. The T1600-28TS default set up is "VLAN 1" > all ports untagged
2. Creating "Guest" VLAN "101"
3. Logging in to EAP Controller Setting Up the SSIDs and VLANs
a.) SSID: Enigma Wireless VLAN ID: 1
b.) SSID: Enigma-Guest Wireless WLAN ID: 101
c.) Management > Mangement VLAN > ID 1
SUCCESS => My EAPs are not reachable anymore...
4. VLAN 1 Editing => Setting Ports 5 and 17 to tagged
=> SUCCESS > My EAPs can be reached and pinged! => VLAN is working and IDs are on the way! CORRECT?
5. VLAN 101 Editing > Setting Ports 5 and 17 to tagged AND Port 24 to untagged
FAILURE > My devices cannot allocate/obtain an IP... they are always trying to connect but it won't work... Any Ideas what i made wrong?
Regards
Magnus
Re:T1600g-28ts vlan
Hi R1D2,
thank you for your Reply... my result when i am doing what you say.
Changing PVID Port 24 directly to 101 IMMEDIATLY
1. My mobile phones lost the wireless network and cannot obtain an IP
AND
2. My Guest Network getting an IP and i have access to the WWW
3. All devices connected via cable cannot acces to the WWW anymore...
It is like an If Else contruction but not like we want AND Construction...
Here some screenshots...
It steals me that the Routing interfaces Situation have to be fixed... but i don't know how...
any ideas... my thought is that VLAN 1 is fixed to this ip adress but i cannot say VLAN 101 192.168.3.1... he says that there is a IP Adress conflict...
Regards
Magnus
thank you for your Reply... my result when i am doing what you say.
Changing PVID Port 24 directly to 101 IMMEDIATLY
1. My mobile phones lost the wireless network and cannot obtain an IP
AND
2. My Guest Network getting an IP and i have access to the WWW
3. All devices connected via cable cannot acces to the WWW anymore...
It is like an If Else contruction but not like we want AND Construction...
Here some screenshots...
It steals me that the Routing interfaces Situation have to be fixed... but i don't know how...
any ideas... my thought is that VLAN 1 is fixed to this ip adress but i cannot say VLAN 101 192.168.3.1... he says that there is a IP Adress conflict...
Regards
Magnus