Business Community > All Threads > Cpe210
< All Threads

Cpe210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cpe210

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cpe210
Cpe210
2018-01-12 22:41:57
Model : CPE210

Hardware Version : V2

Firmware Version :
2.1.6 Build 20170908 Rel. 45234 (4555)


ISP :

Hi everyone, first say sorry for my bad english.

2 days ago (10/01/2018) I bought TP-Link CPE210, all ok, like I wanted, Im very happy with the product.

The problem is: I use the product to connect to the public wireless of my town hall, and I get -67dBm of signal, but... sometimes (many times...) the signal ups to -79dBm (and It stays fixed, consequently, I lose internet speed MB, 20MB --> 6-7MB) and to recover the -67dBm (and my 20MB) I have to restart the antenna, and then I get the -67dBm, summarizing... the antenna lost power or something similar...

There is any solution to my problem?

Thank you!!
  0      
 
  0      
 
#1
Options
6 Reply
Re:Cpe210
2018-01-20 13:21:52
Lo primero actualiza el firmware del cpe http://www.tp-link.com/de/download/CPE210_V1.html#Firmware dos ajusta la distancia de la antena al ap para el tiempo que tarda la señal. SURTE
  0  
  0  
#2
Options
Re:Cpe210
2018-01-22 15:35:31
How far is the town hall away from the CPE210? what mode did you configure on CPE210?
There must be many wifi interferences around. Especially for 2.4G.
  0  
  0  
#3
Options
Re:Cpe210
2018-01-22 23:29:03

LORENZO AR wrote

Lo primero actualiza el firmware del cpe http://www.tp-link.com/de/download/CPE210_V1.html#Firmware dos ajusta la distancia de la antena al ap para el tiempo que tarda la señal. SURTE

Buenas, tengo la última version del firmware: Firmware Version:

2.1.6 Build 20170908 Rel. 45234 (4555)


Lo segundo, ya tengo la distancia ajustada que son unos 100m aprox. (0.1km en la antena.)

Gracias!
  0  
  0  
#4
Options
Re:Cpe210
2018-01-22 23:38:37
To the first question: 100 meters approximately. I configured it in "AP Client Router" mode, other modes haven't what I want. Yes there are a lot of wireless networks, about 20... but... I had other device (which doesn't work anymore) and that device didn't give me this problem. Im happy with the CPE but I have this annoying problem.
  0  
  0  
#5
Options
Re:Cpe210
2018-01-22 23:39:16

Carat1 wrote

How far is the town hall away from the CPE210? what mode did you configure on CPE210?
There must be many wifi interferences around. Especially for 2.4G.

To the first question: 100 meters approximately. I configured it in "AP Client Router" mode, other modes haven't what I want. Yes there are a lot of wireless networks, about 20... but... I had other device (which doesn't work anymore) and that device didn't give me this problem. Im happy with the CPE but I have this annoying problem.
  0  
  0  
#6
Options
Re:Cpe210
2018-01-22 23:40:22

LORENZO AR wrote

Lo primero actualiza el firmware del cpe http://www.tp-link.com/de/download/CPE210_V1.html#Firmware dos ajusta la distancia de la antena al ap para el tiempo que tarda la señal. SURTE

Hola, tengo la ultima version del firmware ( 2.1.6 Build 20170908 Rel. 45234 (4555), y tambien configuré la distancia entre la antena y el ap del wifi publico, unos 100 metros (0.1km en la antena)
  0  
  0  
#7
Options

Information

Helpful: 0

Views: 2271

Replies: 6

Related Articles
cpe210 not working
2173 0
cpe 210 client fail to connect to cpe210 AP
967 0
CPE210
533 0
CPE210 as Subscriber modem
433 0
Deco M5 with CPE210
896 0
CPE210 Frequent dropouts?
6225 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.