TP-Link TL-SG1008PE limited to 100 MBit/s

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TP-Link TL-SG1008PE limited to 100 MBit/s

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

pewe1835

2017-12-09 16:02:15

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2017-12-09

TP-Link TL-SG1008PE limited to 100 MBit/s

2017-12-09 16:02:15

Model :

Hardware Version :

Firmware Version :

ISP :

Hi,

I have installed a TL-ST1008PE, it works fine so far. Only problem is, that the bandwith is limited to 100 MBit/s at each port. If I connected my PC directly to the modem I got 400 MBit/s, if I use the switch in between the bandwith is limited. Is there anything I can do?

Thanks
pewe

1 Reply

R1D2

LV6

2017-12-10 00:16:55

Posts: 4334

Helpful: 1047

Solutions: 173

Stories: 3

Registered: 2015-12-05

Re:TP-Link TL-SG1008PE limited to 100 MBit/s

2017-12-10 00:16:55

The TL-SG1008PE is a Gigabit switch. If auto-negotiation sets the ports to 100 Mbit/s mode, it is almost certainly caused by a bad cable, e.g. by using UTP cables instead of S/FTP cables.

༺ 0100 1101 0010 10ཏ1 0010 0110 1010 1110 ༻

pewe1835

2017-12-09 16:02:15

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2017-12-09

Information

Helpful: 0

Replies: 1

TP-Link TL-SG1008PE limited to 100 MBit/s

TP-Link TL-SG1008PE limited to 100 MBit/s

Information

Voters 0

Tags