kkeegg wrote

Region : Argentina

Model : TL-WA5210G

Hardware Version : V2

Firmware Version :

ISP :

Hi there,

I need help with my current setup. I have almost full line of sight excluding a few trees here and there but I need my two cpe510's to connect over a span of 1.1km. any advice would be great as setting the device at house one as AP and house 2 as client doesn't seem to work, they can not even see each other.

Thanks in advance.

MarHazK wrote

Since House 1 = Server, and House 2 = Client, im just wondering, supposedly "No internet access" or "No Wireless Connection Available"? If "No internet Access" then it will be no ICS has been configured. If its says "No Wireless connection available" then what darren says is exactly true. Anyhow, please specify because 1.1km with a simple fresnel zone still ok with CPE510, just make sure both CPEs are pointed at 10-15deg above should be okay, depending on how close the houses with the obstacles/objects/walls/etc.

danymarc wrote

@kkeegg posted on 04-17-2015 12:20
it's usually a Forest