which omada wifi router can i use witn eap245 and OC200

I need some help,
I use a OC200 with 3 EAP245 V3 AP's.
I want to buy a tp-link router to replace my broken RPI that I used as a VPN server.
My question is if I go for the ER706W and use it as a router is it then still possible to use the wifi and combine this with the EAP245 and also use the roaming.
Thanks in advance for all the input.
Ro
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content

- Copy Link
- Report Inappropriate Content

Hi @Rozij
Thanks for posting in our business forum.
Rozij wrote
I recieved my ER706W and connected it to my network.
After a while it appears in the list of ADD, but if I click to adopt it, it gives a fault and it's not adopted.
my network is 192.168.169.1
the router is 192.168.0.1
What can I do to make it work and adopt the wifi router to the OC200
MODEM/ROUTER ---> Switch---> ER607W
--->EAP245 v3 1
--->EAP245 v3 2
--->EAP245 v3 3
--->OC200
---> LAPTOP.......
I tryed to connect MODEM/ROUTER ---> ER706W---> switch--->EAP245 v3 1
--->EAP245 v3 2
--->EAP245 v3 3
--->OC200
---> LAPTOP.......
but then the wifi has no internetconnection and then I can't connect to the cloud anymore.
Change the router to 192.168.169.1 before trying to adopt it.
Set the LAN(VLAN1) on the controller to 192.168.169.1.
Then disconnect the modem/router and use ER706W. Adopt.
Disconnect the modem/router and change its subnet to a new one. Do it separately.
- Copy Link
- Report Inappropriate Content

- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I recieved my ER706W and connected it to my network.
After a while it appears in the list of ADD, but if I click to adopt it, it gives a fault and it's not adopted.
my network is 192.168.169.1
the router is 192.168.0.1
What can I do to make it work and adopt the wifi router to the OC200
MODEM/ROUTER ---> Switch---> ER607W
--->EAP245 v3 1
--->EAP245 v3 2
--->EAP245 v3 3
--->OC200
---> LAPTOP.......
I tryed to connect MODEM/ROUTER ---> ER706W---> switch--->EAP245 v3 1
--->EAP245 v3 2
--->EAP245 v3 3
--->OC200
---> LAPTOP.......
but then the wifi has no internetconnection and then I can't connect to the cloud anymore.
- Copy Link
- Report Inappropriate Content

Hi @Rozij
Thanks for posting in our business forum.
Rozij wrote
I recieved my ER706W and connected it to my network.
After a while it appears in the list of ADD, but if I click to adopt it, it gives a fault and it's not adopted.
my network is 192.168.169.1
the router is 192.168.0.1
What can I do to make it work and adopt the wifi router to the OC200
MODEM/ROUTER ---> Switch---> ER607W
--->EAP245 v3 1
--->EAP245 v3 2
--->EAP245 v3 3
--->OC200
---> LAPTOP.......
I tryed to connect MODEM/ROUTER ---> ER706W---> switch--->EAP245 v3 1
--->EAP245 v3 2
--->EAP245 v3 3
--->OC200
---> LAPTOP.......
but then the wifi has no internetconnection and then I can't connect to the cloud anymore.
Change the router to 192.168.169.1 before trying to adopt it.
Set the LAN(VLAN1) on the controller to 192.168.169.1.
Then disconnect the modem/router and use ER706W. Adopt.
Disconnect the modem/router and change its subnet to a new one. Do it separately.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content

Information
Helpful: 0
Views: 94
Replies: 5
Voters 0
No one has voted for it yet.