Hi All,

Hoping someone can help me out here. I am trying to do a One to Many NAT and I cannot seem to find any indication that the ER605 has the feature I'm looking for.

NOTE: I AM NOT TRYING TO DO A 1:1 NAT

I am using an ER605 which has Two ISP Connections going into a TP-Link Omada ER605, I am using the OC200 Controller. I have multiple VLANS being managed by Omada.

My Primary WAN Uplink InterfacePort in the ER605 WAN Port has a block of Static IP addresses.

My Secondary WAN Uplink Interface Port in the ER605 in the WAN/LAN1 Port has a DHCP Address.

For example, let's say my primary internal network is 192.168.100.0/24, my IOT Network is 192.168.200.0/24 & my Guest Network is 192.168.201.0/24.

I want all outbound traffic to the Internet from Subnet 192.168.100.0/24 to be routed out of my Primary WAN Uplink (Native/Default).

I want all outbound traffic to the Internet from Subnet 192.168.200.0/24 to be routed out of my Primary WAN Uplink Port however I want it to use a different Public IP Address contained within the block of IP Addresses that I have.

I want all outbound traffic to the Internet from Subnet 192.168.201.0/24 to be routed over the Secondary ISP WAN Uplink Port in WAN/LAN1.

Can the ER605 support this scenario? If it cannot, is there an ETA on when it will be supported. This is NAT 101 for Medium Business Devices.

Thanks