TL-R470+ Inbound Routing Issues
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-R470+ Inbound Routing Issues
Region : UnitedKingdom
Model : TL-R470T+
Hardware Version : V2
Firmware Version : 5.1.2 Build 20130116 Rel.45577s
ISP : Virgin Media & Plusnet
Hello All,
I hope that you can help me, I am using 2 ISP's via WAN1 (Virgin) and WAN2 (PlusNet) and this is working fine. I understand that if I open ports etc via Virtual Server then I can access say a IIS server on port 80 on either external static IP's.
I have mutiple services running so I would like to do the following:
STATIC IP 1-> WAN1 -> to Windows Server ports 80 & 443
STATIC IP 2-> WAN2 -> to Linux Server ports 80 & 443
I have attempted to setup some Routing Rules but this does not appear to work, See attached screenshots:(I know there is no kind of port blocking happening as I can access services via ports 80 and 443 if I use the Virtual Server options but this does not allow for the selection of which WAN I want it to use).
Main Screen Config - For Security I have blanked out part of the MAC and IP's
Policy Routing - Rules I have attempted, I do not understnad why this now does not work.
Maybe this router cannot do what I want and if thats the case then fine but I would be surprised if it could not, Any help apreciated.
Mike.
P.S. I did see this post but still any further suggestions welcome.
http://forum.tp-link.com/showthread.php?74644-Load-Balancer-Settings®ion=china
Model : TL-R470T+
Hardware Version : V2
Firmware Version : 5.1.2 Build 20130116 Rel.45577s
ISP : Virgin Media & Plusnet
Hello All,
I hope that you can help me, I am using 2 ISP's via WAN1 (Virgin) and WAN2 (PlusNet) and this is working fine. I understand that if I open ports etc via Virtual Server then I can access say a IIS server on port 80 on either external static IP's.
I have mutiple services running so I would like to do the following:
STATIC IP 1-> WAN1 -> to Windows Server ports 80 & 443
STATIC IP 2-> WAN2 -> to Linux Server ports 80 & 443
I have attempted to setup some Routing Rules but this does not appear to work, See attached screenshots:(I know there is no kind of port blocking happening as I can access services via ports 80 and 443 if I use the Virtual Server options but this does not allow for the selection of which WAN I want it to use).
Main Screen Config - For Security I have blanked out part of the MAC and IP's
Policy Routing - Rules I have attempted, I do not understnad why this now does not work.
Maybe this router cannot do what I want and if thats the case then fine but I would be surprised if it could not, Any help apreciated.
Mike.
P.S. I did see this post but still any further suggestions welcome.
http://forum.tp-link.com/showthread.php?74644-Load-Balancer-Settings®ion=china