Wifi 2.4ghz Strength Issue
Dear Team,
We have total 9 EAP610 devices in our premises. Each devices are placed at 10 meters distance each. We are facing connectivity issue after configuring Threshold on all devices at 2.4GHz band. Kindly recommend what setting can be done for strong and reliable wifi strength.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
To improve connectivity with your EAP610 devices, consider the following adjustments:
1. **RSSI Threshold**: Ensure that the RSSI threshold is not set too high, as this can cause devices to disconnect prematurely. Try setting it to a moderate level, such as -70 dBm, and adjust based on performance.
2. **Channel Selection**: Use non-overlapping channels (1, 6, 11) for the 2.4GHz band to minimize interference. You can manually set channels or enable automatic channel selection if supported.
3. **Transmit Power**: Adjust the transmit power to ensure adequate coverage without causing interference. Start with medium power and adjust as needed.
4. **Band Steering**: Enable band steering to encourage devices to connect to the 5GHz band when possible, reducing congestion on the 2.4GHz band.
5. **Load Balancing**: If supported, enable load balancing to distribute clients evenly across access points.
6. **Firmware Updates**: Ensure all EAP610 devices are running the latest firmware to benefit from performance improvements and bug fixes.
7. **AP Placement**: Verify that the placement of your access points is optimal, avoiding physical obstructions and sources of interference.
8. **Client Device Settings**: Ensure that client devices are configured to prefer the 5GHz band and have updated network drivers.
Below is a link for your reference:
- Copy Link
- Report Inappropriate Content
To improve connectivity with your EAP610 devices, consider the following adjustments:
1. **RSSI Threshold**: Ensure that the RSSI threshold is not set too high, as this can cause devices to disconnect prematurely. Try setting it to a moderate level, such as -70 dBm, and adjust based on performance.
2. **Channel Selection**: Use non-overlapping channels (1, 6, 11) for the 2.4GHz band to minimize interference. You can manually set channels or enable automatic channel selection if supported.
3. **Transmit Power**: Adjust the transmit power to ensure adequate coverage without causing interference. Start with medium power and adjust as needed.
4. **Band Steering**: Enable band steering to encourage devices to connect to the 5GHz band when possible, reducing congestion on the 2.4GHz band.
5. **Load Balancing**: If supported, enable load balancing to distribute clients evenly across access points.
6. **Firmware Updates**: Ensure all EAP610 devices are running the latest firmware to benefit from performance improvements and bug fixes.
7. **AP Placement**: Verify that the placement of your access points is optimal, avoiding physical obstructions and sources of interference.
8. **Client Device Settings**: Ensure that client devices are configured to prefer the 5GHz band and have updated network drivers.
Below is a link for your reference:
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 51
Replies: 1
Voters 0
No one has voted for it yet.