TL-ER6120 issue with DNS on DSL WAN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ER6120 issue with DNS on DSL WAN
Region : Argentina
Model : TL-ER6120
Hardware Version : V1
Firmware Version :
ISP :
WAN 1 = cable internet (Telenet) through CBN cable modem CV6181E
WAN 2 = dsl internet (Belgacom) through Technicolor DSL gateway TG589Bvn (b-box 3)
Previously we used a Peplink 380 but decided to replace it with the TP-Link TL-ER6120 because the 380 was too noisy and the 6120 fanless.
Setup is almost out of the box with most factory settings. WAN-port settings have been entered with data from the ISP's.
Clients benefit from the 2 connections. If one would fail, there is never a loss of connection to the internet.
This has been working fine with the Peplink, but now with the TP-Link we experience sometimes issues with the DNS. Whenever a client is connected to the cable internet (WAN 1) it is OK, but if the connection moves to the dsl internet (WAN 2), then from time to time a DNS error occurs and surfing to several websites is not possible.
Is there any setting in the TL-ER6120 we should change in order to solve this issue?
Model : TL-ER6120
Hardware Version : V1
Firmware Version :
ISP :
WAN 1 = cable internet (Telenet) through CBN cable modem CV6181E
WAN 2 = dsl internet (Belgacom) through Technicolor DSL gateway TG589Bvn (b-box 3)
Previously we used a Peplink 380 but decided to replace it with the TP-Link TL-ER6120 because the 380 was too noisy and the 6120 fanless.
Setup is almost out of the box with most factory settings. WAN-port settings have been entered with data from the ISP's.
Clients benefit from the 2 connections. If one would fail, there is never a loss of connection to the internet.
This has been working fine with the Peplink, but now with the TP-Link we experience sometimes issues with the DNS. Whenever a client is connected to the cable internet (WAN 1) it is OK, but if the connection moves to the dsl internet (WAN 2), then from time to time a DNS error occurs and surfing to several websites is not possible.
Is there any setting in the TL-ER6120 we should change in order to solve this issue?
