Business Community > Routers > Trouble Setting Up Virtual Servers for Cameras on ER605
< Routers

Trouble Setting Up Virtual Servers for Cameras on ER605

Trouble Setting Up Virtual Servers for Cameras on ER605

Trouble Setting Up Virtual Servers for Cameras on ER605
Trouble Setting Up Virtual Servers for Cameras on ER605
2 weeks ago - last edited 2 weeks ago
Tags: #NAT #Firewall
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.2.6 Build 20240718 Rel.82712

Hello,

I am the owner of an ER605 router. I purchased it for the ability to connect 2 WANs (a backup and a primary one, only the primary has a public IP).

Both ISPs are connected via ONU. The network setup is as follows: ONU (onu-1, onu-2) > ER605 > Deco M5.

 

 

There are also cameras in the network accessible via the internal IP 192.168.0.199 and an intercom at 192.168.0.200.

 

Previously, when I used only the Deco M5, I had no issues exposing the cameras to the public and connecting to them via the Hikvision app. Now, I have connected the cameras to the ER605 and set up virtual servers for both IPs, but I am unable to connect to them via the app.

 

I suspected the issue might be with the camera settings, but running an nginx server on port 8080 in Docker also did not work.

Any ideas on what else needs to be configured?

  0      
 
  0      
 
#1
Options
8 Reply
Re:Trouble Setting Up Virtual Servers for Cameras on ER605
2 weeks ago

Hi @Vipro 

Thanks for posting in our business forum.
There is no extra step needed.

Virtual Services(Port Forwarding) on the Router Doesn't Take Effect

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#2
Options
Re:Trouble Setting Up Virtual Servers for Cameras on ER605
2 weeks ago

  @Clive_A Thank you for the information.

I’ve already seen this guide, but I went through it again just to be sure.

 

Below are the results:

  1. Accessible.
  2. Settings are correct.
  3. Public IP is available.
  4. The ISP does not block ports because everything works fine through the Deco M5.
  5. Nothing additional is configured.

 

From the outside, the port appears to be closed—I tested it using Telnet.

 

As far as I understand, opening a port should only require creating a virtual server, correct? However, it seems like it doesn’t actually open the port.

I’ve even reset the router to factory settings, but the result is the same. It feels like this functionality isn’t working. Could it be related to the firmware version? Would it make sense to try downgrading the firmware?

  0  
  0  
#3
Options
Re:Trouble Setting Up Virtual Servers for Cameras on ER605
2 weeks ago

Hi @Vipro 

Thanks for posting in our business forum.

Vipro wrote

  @Clive_A Thank you for the information.

I’ve already seen this guide, but I went through it again just to be sure.

 

Below are the results:

  1. Accessible.
  2. Settings are correct.
  3. Public IP is available.
  4. The ISP does not block ports because everything works fine through the Deco M5.
  5. Nothing additional is configured.

 

From the outside, the port appears to be closed—I tested it using Telnet.

 

As far as I understand, opening a port should only require creating a virtual server, correct? However, it seems like it doesn’t actually open the port.

I’ve even reset the router to factory settings, but the result is the same. It feels like this functionality isn’t working. Could it be related to the firmware version? Would it make sense to try downgrading the firmware?

No. I have port forwarded on various Omada models for times. Also, this firmware has not changed anything related to the port forwarding.

 

Nmap and scan your WAN, will that display it as disabled? Turn off the related firewall function. Online port scan result?

If you try the Deco M5 right now, it works instantly by Nmap or telnet?

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#4
Options
Re:Trouble Setting Up Virtual Servers for Cameras on ER605
2 weeks ago

  @Clive_A 


 

 

 

 

 

Even though I added Access Control in the firewall.

 

Yes, with the Deco M5, I can get access immediately (I just need to add Port Forwarding).

  0  
  0  
#5
Options
Re:Trouble Setting Up Virtual Servers for Cameras on ER605
2 weeks ago

  @Vipro 

 

Can you try to forward only 8000 port first (so delete this 7999 redirection that you have). Does it change anything?

 

Best Regards

RR

  0  
  0  
#6
Options
Re:Trouble Setting Up Virtual Servers for Cameras on ER605
2 weeks ago - last edited 2 weeks ago

  @RaRu 

The same.

 

  0  
  0  
#7
Options
Re:Trouble Setting Up Virtual Servers for Cameras on ER605
2 weeks ago

Hi @Vipro 

Thanks for posting in our business forum.

Vipro wrote

  @RaRu 

The same.

 

Filtered does not mean Closed. This does not mean the port forwarding is not working. Filtered port status is an improvement in the security of stealth scans.

 

What's the web port of the IPC? Port forward the web port of the IPC, and set this port forward external port as 2024. Then, access your publicIP:2024 and will you be able to access the page?

Note that the firewall of a local device can also affect the external access.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#8
Options
Re:Trouble Setting Up Virtual Servers for Cameras on ER605
a week ago

  @Clive_A 

 

I tried changing both the external and internal ports, but nothing helped. The only thing I managed to find out is that the issue is most likely related to the TCP/UDP protocol, as I can use the same port for HTTP connections but cannot use it for TCP/UDP.

 

 

I also created a separate Service Type, but it didn't help.

 

  0  
  0  
#9
Options

Information

Helpful: 0

Views: 227

Replies: 8

Tags

NAT Firewall
Related Articles
Virtual Servers / Port Forwarding from OpenVPN Tunnel
625 2
 ER605 Port Forwarding (Virtual Servers) is not working
1120 0
Trouble setting up OpenVPN client (for ExpressVPN) on ER 605 V2
467 0
 Virtual Servers on TL-R605
1325 0
Max Virtual Server
648 0
Virtual Servers/Port Forwarders
874 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.