Home

Forums

Stories

Knowledge Base

Business Community > Controllers > ER605 V

< Controllers

ER605 V

ER605 V

ER605 V

2024-11-29 15:27:58 - last edited 2024-12-02 06:45:49

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-11-28

ER605 V

2024-11-29 15:27:58 - last edited 2024-12-02 06:45:49

Model: OC200

Hardware Version: V1

Firmware Version: 1.32.6 Build 20241101 Rel.41525

I run a ER605 v2 (Firmware 2.2.6 Build 20240718 Rel.82712) controlled by a OC 200V1. The modem is in Bridge Mode. When the ER605 is standalone I have no issues with Port Forwarding (+ ACL Rule). When controlled by the OC200 it does not work. I have read several forum discussions now. None is giving a explanation, or a solution. Is there a workaround, or a specific firmware, that enables Portforwarding AND controlling with OC200?

0

0

#1

1 Accepted Solution

2024-12-02 06:45:46 - last edited 2024-12-02 06:45:49

Posts: 1362

Helpful: 156

Solutions: 539

Stories: 0

Registered: 2024-06-22

Re:ER605 V-Solution

2024-12-02 06:45:46 - last edited 2024-12-02 06:45:49

Please check the troubleshooting guide below first:

Virtual Services(Port Forwarding) on the Router Doesn't Take Effect

If you had tried that, please share some screenshots of your config, and how did you check whether the port in opened or not.

Wish you a happy life and smooth network usage!

Recommended Solution

0

0

#4

3 Reply

LV4

2024-11-29 16:18:48

Posts: 611

Helpful: 289

Solutions: 42

Stories: 0

Registered: 2022-07-05

Re:ER605 V

2024-11-29 16:18:48

The OC200 fully updated?

I can not teach anyone anything - I can only make them think - Socrates

0

0

#2

LV1

2024-11-29 16:21:42

Posts: 2

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-11-28

Re:ER605 V

2024-11-29 16:21:42

@KimcheeGUN Yes, today. Version is 1.32.6 Build 20241101 Rel.41525

0

0

#3

2024-12-02 06:45:46 - last edited 2024-12-02 06:45:49

Posts: 1362

Helpful: 156

Solutions: 539

Stories: 0

Registered: 2024-06-22

Re:ER605 V-Solution

2024-12-02 06:45:46 - last edited 2024-12-02 06:45:49

Please check the troubleshooting guide below first:

Virtual Services(Port Forwarding) on the Router Doesn't Take Effect

If you had tried that, please share some screenshots of your config, and how did you check whether the port in opened or not.

Wish you a happy life and smooth network usage!

Recommended Solution

0

0

#4