Home

Forums

Stories

Knowledge Base

Business Community > Switches > Standalone SG2210XMP-M2, DHCP, VLAN

< Switches

Standalone SG2210XMP-M2, DHCP, VLAN

Mossfeldt

2 weeks ago - last edited 2 weeks ago

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2024-11-28

Standalone SG2210XMP-M2, DHCP, VLAN

2 weeks ago - last edited 2 weeks ago

Tags: #VLAN & Multi-Networks #Configuration #Network Connectivity #DHCP Service

Model: SG2210XMP-M2

Hardware Version:

Firmware Version:

Hi all!

Really hope I can get some guidance here.

A friend recently bought a SG2210XMP-M2 to replace his router and fiber converter. It's a fiber converter and a simple router from Swedish internet provider Telia.

The plan was to plug the SFP into the switch and replace bot older units. This works, kind of. We can get internet working with the switch but I'm unsure of how to configure the switch to work as a DHCP router and how to set up VLANs to get the ipTV to work.

I tried to configure the switch with the mobile app but I can't find any of the configuration pages for VLAN or DHCP in the app. Also tried the webGUI, activated DHCP but that didn't seem to work.

In short.

I would like to use on of the SFP-ports as WAN.

I would like the switch to also function as his DHCP-server.

I would like to configure VLAN to one of the LAN-ports. Preferable port 8. VLAN ID 845, priority 4.

The rest of the ports should be used as ordinary LAN with internet access.

Really grateful if someone could guide me how to set this up.

1 Accepted Solution

Clive_A

2 weeks ago - last edited 2 weeks ago

Posts: 5940

Helpful: 2909

Solutions: 1354

Stories: 0

Registered: 2023-06-09

Re:Standalone SG2210XMP-M2, DHCP, VLAN-Solution

2 weeks ago - last edited 2 weeks ago

Hi @Mossfeldt

Thanks for posting in our business forum.

Please don't use the app to configure the complex features. Some complex functions will never be added to the app for configuration but for viewing. The app allows simple feature configuration.

Mossfeldt wrote

In short.

I would like to use on of the SFP-ports as WAN.

I would like the switch to also function as his DHCP-server.

I would like to configure VLAN to one of the LAN-ports. Preferable port 8. VLAN ID 845, priority 4.

The rest of the ports should be used as ordinary LAN with internet access.

This is a switch and it does not support NAT. Based on the first request, you are wrong about this product. Read the specs: https://www.tp-link.com/en/business-networking/omada-switch-smart/sg2210xmp-m2/#specifications

DHCP server is doable and it can be a DHCP server. How to configure switch as DHCP server on Standalone mode

Same to the answer above.

These ports are LAN(switching) for local access or Internet if you have Internet supply to them but prior to the Internet access, you have to have a NAT.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.

Recommended Solution

1 Reply

Clive_A

2 weeks ago - last edited 2 weeks ago

Posts: 5940

Helpful: 2909

Solutions: 1354

Stories: 0

Registered: 2023-06-09

Re:Standalone SG2210XMP-M2, DHCP, VLAN-Solution

2 weeks ago - last edited 2 weeks ago

Hi @Mossfeldt

Thanks for posting in our business forum.

Please don't use the app to configure the complex features. Some complex functions will never be added to the app for configuration but for viewing. The app allows simple feature configuration.

Mossfeldt wrote

In short.

I would like to use on of the SFP-ports as WAN.

I would like the switch to also function as his DHCP-server.

I would like to configure VLAN to one of the LAN-ports. Preferable port 8. VLAN ID 845, priority 4.

The rest of the ports should be used as ordinary LAN with internet access.

DHCP server is doable and it can be a DHCP server. How to configure switch as DHCP server on Standalone mode

Same to the answer above.

These ports are LAN(switching) for local access or Internet if you have Internet supply to them but prior to the Internet access, you have to have a NAT.

Standalone SG2210XMP-M2, DHCP, VLAN

Standalone SG2210XMP-M2, DHCP, VLAN

Information

Voters 0

Tags