EAP225 lan bridge
we have a shed what we have connected with a mesh between the 610 and the 225.
sg2008p>eap610 --mesh-- eap225>dumb switch with cameras
all the management IPs for these devices are on pvid1, the cameras are on vlan10, wireless clients is on vlan20
wireless works from eap225 but we are unable to get the cameras running.
will swapping out the dumb switch with smart switch like DS108GE?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @snoop-snoop
Yes. Dump switches will work in the default VLAN1, To let the cameras work in VLAN10, you need a VLAN-sensible switch, DS108GE can do that.
You can also consider SDN switch such as SG2008, so that you can manage all of them via Omada controller.
- Copy Link
- Report Inappropriate Content
Hi @snoop-snoop
Yes. Dump switches will work in the default VLAN1, To let the cameras work in VLAN10, you need a VLAN-sensible switch, DS108GE can do that.
You can also consider SDN switch such as SG2008, so that you can manage all of them via Omada controller.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Vincent-TP wrote
Hi @snoop-snoop
Yes. Dump switches will work in the default VLAN1, To let the cameras work in VLAN10, you need a VLAN-sensible switch, DS108GE can do that.
You can also consider SDN switch such as SG2008, so that you can manage all of them via Omada controller.
sg2008 got in today.
adopted it, prepped the port for the access point and the cameras with their respective switch profiles and just like that it worked without fuss.
could have saved a few bucks going for the cheaper models but i figured managing all these from a single pane of glass is worth the extra dollars.
thanks for the solid advice.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 176
Replies: 4
Voters 0
No one has voted for it yet.