Wifi clients are connecting but not getting IP addresses
I had to physically move my network into a new cabinet this weekend and had thought nothing of it as the network configuration wasn't changing and working perfectly. My Default Wireless network has no issues. But now, for some reason all of the other VLAN's have clients that connect but don't get an IP address. I have an have 5 total VLANs and none of clients assigned can connect wirelessly except the clients on the default network. A new device can't even connect to any of the VLAN's except default. This was all working before the physical move. Yes I've rebooted all of the devices, yes all of the devices are on the current firmware version. Yes the DHCP pools are up. I have no idea how to resolve this issue.
OC200 -> ER8411 -> TL-SG2428P -> EAP660 HD.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
For anyone else having this problem
Devices -> (your) Switch - Ports - what ever port is on is a verified profile.
All of my ports were set to ALL except the one, the upload port that was set to LAN that wasn't a profile that was available.
BTW the TP-Link Omada tech support chat is very very good.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Ahh gotcha. You are correct. it's been a while since I stood up a VLAN. I haven't changed these settings though. The interfances that are selected are the active LAN interfaces on the router.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
the upload from the router to the Swich is on port 11 one of the Server NIC's is on port 8.
- Copy Link
- Report Inappropriate Content
then you have to check the switch ports that go to the access point and router. there you must use switch port profile all
If that doesn't work then I have no more suggestions.
- Copy Link
- Report Inappropriate Content
For anyone else having this problem
Devices -> (your) Switch - Ports - what ever port is on is a verified profile.
All of my ports were set to ALL except the one, the upload port that was set to LAN that wasn't a profile that was available.
BTW the TP-Link Omada tech support chat is very very good.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 477
Replies: 10
Voters 0
No one has voted for it yet.