Reconnect PPTP VPN
I have a setup with three sites, using 2 ER605 and one ER707 routers. The interconnect through IPSEC, which is fine and will automatically reconnect if any of the sites would have a short outage.
Also, I have configured PPTP VPN connections from to sites to the third because some traffic needs to be routed through this site to the internet. This specific connection will drop every now and then (since the third site has a consumer internet connection I assume that the modem reconnects somtimes) but will never reconnect automatically. I have to disable and enable the connection through the Omada console.
Is there a quicker way of initiating the reconnect, e.g. through a CLI script or something similar that could be prepared and run?
Tom
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi all,
The case is closed due to no further followup. We have not located the reason yet. If you have a similar issue, please start a new thread.
- Copy Link
- Report Inappropriate Content
@tgoschuetz i also have pptp client problem with my omada 605 (fw 2.2.6) ,
pptp client 1 always reconnects after disconnect but client 2 not.
i need every day disable-enable pptp connection via omadas gui for reconnect.
even my old asus router can automatically reconnect as pptp client but tplink not??
- Copy Link
- Report Inappropriate Content
Hi @tgoschuetz
Thanks for posting in our business forum.
So to speak that the router is a PPTP client?
- Copy Link
- Report Inappropriate Content
@Clive_A yes, look at screenshots
- Copy Link
- Report Inappropriate Content
Hi @YuriyB
I am not asking you but him about this to make sure I understand his situation. I am aware of your reported issue.
- Copy Link
- Report Inappropriate Content
@Clive_A yes, one of the ER605 and the ER707 are clients, one site with an ER605 is the PPTP server. This is also the one that has a consumer internet access, so no fixed IP though it would only change when the modem would restart which is rarely the case. We have a dynDNS record for this site to cover for the non static IP.
I think one cannot really prevent the PPTP from disconnecting, I am just wondering why it does not reconnect automatically or whether there is a quicker way of 'resetting' it.
Tom
- Copy Link
- Report Inappropriate Content
Hi @tgoschuetz
Thank you so much for taking the time to post the issue on TP-Link community!
To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID240849613, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!
- Copy Link
- Report Inappropriate Content
Hi all,
The case is closed due to no further followup. We have not located the reason yet. If you have a similar issue, please start a new thread.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 440
Replies: 7
Voters 0
No one has voted for it yet.