DHCP server set ip range over CLI
DHCP server set ip range over CLI
Hello,
I have a unique network configuration where I would like to write my own software to configure the IP range of several DHCP pools with separate VLANs. I was planning on doing it over SSH however I can't find a way to set the IP range of a specific DHCP pool.
1 Accepted Solution
Re:DHCP server set ip range over CLI-Solution
Hi @Juniormunk
Thanks for posting in our business forum.
Here's the guide:
https://static.tp-link.com/upload/manual/2023/202307/20230725/1910013378_ER605(UN)2.0_CLI.pdf
You might wanna start reading from this:
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.
Re:DHCP server set ip range over CLI-Solution
Hi @Juniormunk
Thanks for posting in our business forum.
Here's the guide:
https://static.tp-link.com/upload/manual/2023/202307/20230725/1910013378_ER605(UN)2.0_CLI.pdf
You might wanna start reading from this:
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.