TP-Link Community > Feature Requests > Separate voltage and current control for Energy Monitoring function
< Feature Requests
 
8
Votes

Separate voltage and current control for Energy Monitoring function

 
8
Votes

Separate voltage and current control for Energy Monitoring function

Separate voltage and current control for Energy Monitoring function
Separate voltage and current control for Energy Monitoring function
2024-07-27 20:01:46
Tags: #SmartThings #Third-party Intergations #Energy Monitoring #Power meter
Model: Tapo P110   Tapo P115   Tapo P110M  
Hardware Version:
Firmware Version:

There is Power meter function in those sockets. I live in country with unstable voltage. I have Air Conditioner connected through the P115 socket and it works great. Unfortunately I can't see the real voltage. When voltage drops below 150 volts, I would prefer not to switch on AC.

I also have Home Assistant node, so, have those sensors data (voltage and current) would be awesome. Now I have to use additional unnecessory DIY solution for this. It is quite annoying, knowing the sensor is already built into the socket.

#1
Options
8 Reply
Re:Separate voltage and current control for Energy Monitoring function
2024-08-20 04:02:02
I would also like something like that, I noticed that the external unit would make a noise when the voltage is low
#2
Options
RE:Separate voltage and current control for Energy Monitoring function
2024-08-20 04:02:29
I would also like something like that, I noticed that the external unit would make a noise when the voltage is low
#3
Options
Re:Separate voltage and current control for Energy Monitoring function
2024-08-28 05:58:10

All manufacturers have monitoring of an important parameter - voltage. Without this important parameter, how can I get the current strength? It is not clear why voltage monitoring is not implemented.

#4
Options
RE:Separate voltage and current control for Energy Monitoring function
2024-08-28 06:01:22
At least voltage monitoring. Always knowing the voltage and power at any given time - you can get the current strength
#5
Options
RE:Separate voltage and current control for Energy Monitoring function
2024-10-08 19:37:13
That was what i looking for!! Volate readings especially to prevent a/c to operate under udervoltage conditions
#6
Options
RE:Separate voltage and current control for Energy Monitoring function
2024-10-29 01:29:14
Voltage monitoring is required.
#7
Options
Re:Separate voltage and current control for Energy Monitoring function
2024-10-29 09:24:55

Naturally, if we are shown the power consumption, then the outlet knows about the voltage and current strength. But for some reason, they categorically do not want to at least show the current voltage, not to mention voltage monitoring - as for example at Yandex sockets - builds a graph for a month

#8
Options
Re:Separate voltage and current control for Energy Monitoring function
23 hours ago

It is such a shame that P115 / P110 thru Tapo smart app do not offer voltage info.
Even generic chinese smart sockets have voltage info included. Some of them even offer custom actions to be triggered when voltage threshold is reached.

I think this feature is a must to be implemented for such a device. Voltage for a power socket is a #1 metric in my opinion.

 

#10
Options

Information

Helpful: 8

Views: 476

Replies: 8

Voters 9

voter's avatar
voter's avatar
voter's avatar
voter's avatar
+ 5 Voters

Tags

SmartThings Third-party Intergations Energy Monitoring
Power meter
Related Request
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.