Hi Everyone,

Got a puzzling one for you and need some help! 
 

I have the following:

1 x ER605 Router

1 x OC200 Controller

1 X SG2428P Switch ( 28 Port Gigabit POE+)

Interfaces Configured:

Interface 1 (Default) - Device Management (192.168.0.0/24)

Interface 100 - Servers (192.168.1.0/24)

Interface 101 - DMZ Servers (192.168.2.0/24)

Interface 102 - Corporate (192.168.3.1/24)

Interface 103 - Guest Wireless (192.168.4.1/24)

Interface 104 - IOT Devices (192.168.5.1/24)

Interface 105 - CCTV Devices (192.168.6.1/24)

Interface 106 - Printers (192.168.7.1/24)

Interface 107 - SSL VPN (192.168.8.1/24)

I have physically connected it all the devices together and adopted the Router and Switch successfully. My issue is when I create the Interfaces and have devices in each of them I am unable to ping or any other protocol between them - HOWEVER there is an ABNORMALITY coming :-)    I can get a DHCP Address from my Domain Controller hosted in Interface 100 but cannot Ping, RDP etc into it or get into any other VLAN.

i went through and triple checked all settings, added in Switch and Gateway Rules as a test but they didn't work either.

When I do a tracert I can hit the interface IP but it will not go any further than that.

Hope someone can help!