load balancer is not working with Jio UBR connection
load balancer is not working with Jio UBR connection
load balancer is not working with Jio UBR connection, we have two connection 1) BSNL 2) Jio UBR, we have setup these two line to the TP Link ER605 for WAN1 & WAN2 respectively, even though status shows link up, in transmissions it shows offline for Jio connection. Proper configurations are made.
1 Accepted Solution
Re:load balancer is not working with Jio UBR connection-Solution
Hi @MSpeetha
Thanks for posting in our business forum.
Please take a look at this guide. And make sure you have properly configured your load balance.
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting Manual ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first. Don't be a lazy asker.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.
Re:load balancer is not working with Jio UBR connection-Solution
Hi @MSpeetha
Thanks for posting in our business forum.
Please take a look at this guide. And make sure you have properly configured your load balance.
Best Regards!
If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post.
Look for a model? Search your model NOW
Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚
☛ ★ Configuration Guide ★ ☚
☛ ★ Knowledge Base ★ ☚
☛ ★ Troubleshooting Manual ★ ☚
● Be kind and nice.
● Stay on the topic.
● Post details.
● Search first. Don't be a lazy asker.
● Please don't take it for granted.
● No email confidentiality should be violated.
● S/N, MAC, and your true public IP should be mosaiced.