Unable to connect to IPsec VPN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I recently got these credentials (as shown in pic) from Adguard VPN to configure the router for VPN access.
I browsed through the settings of router and couldn't find anywhere to put those credentials.
I even tried the Omada Software Controller.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Turns out the Omada er605 v2 doesn't support this vpn protocol. I guess I will have to wait for their Wireguard Protocol.
I contacted the Adguard VPN support and they said that there are very few routers that actually support IPsec VPN. And added that TPLINK Routers do not have this feature
For those who want to use this Adguard VPN IPsec Protocol on Linux can use the following guide from adguard subreddit
```
In command prompt type sudo apt-get update, if required - enter your Ubuntu password.
To install additional components type sudo apt-get install -y strongswan network-manager-strongswan libcharon-extra-plugins
Go to Settings -> Network and click the "plus" icon in VPN section. In appeared window select the type of connection - IPsec/IKEv2 (strongswan).
Fill in the boxes as shown in the screenshot below from your AdGuard VPN dashboard:
IMAGE ATTACHED BELOW
Then, To prevent IPv6 leaks go to IPv6 tab and set Disable in IPv6 Method section.
```
https://i.imgur.com/izHMbsQ.png
https://i.imgur.com/4hLBWbc.png
- Copy Link
- Report Inappropriate Content
Hi @xr4nchy
This profile does not seem to be a choice for the router. It's for mobile and Windows where you can set up the username and password.
We don't have this option to let you input the username and password. Let alone this might affect how the router routing works. Try other types of VPN instead of the IPsec with username and password. We don't support it.
- Copy Link
- Report Inappropriate Content
@xr4nchy I'm interested in the same thing.
This is specifically in the "Router" section of the Adguard VPN so I doubt it's only for Windows and Android.
- Copy Link
- Report Inappropriate Content
@luvxinh It looks like you're trying to use a feature from a consumer router on a business router. It will work with the ER605 router from what I can see in the Omada Controller or any of the Omada routers for that matter. You will be better off using the AdGuard DNS instead in this situation.
- Copy Link
- Report Inappropriate Content
Turns out the Omada er605 v2 doesn't support this vpn protocol. I guess I will have to wait for their Wireguard Protocol.
I contacted the Adguard VPN support and they said that there are very few routers that actually support IPsec VPN. And added that TPLINK Routers do not have this feature
For those who want to use this Adguard VPN IPsec Protocol on Linux can use the following guide from adguard subreddit
```
In command prompt type sudo apt-get update, if required - enter your Ubuntu password.
To install additional components type sudo apt-get install -y strongswan network-manager-strongswan libcharon-extra-plugins
Go to Settings -> Network and click the "plus" icon in VPN section. In appeared window select the type of connection - IPsec/IKEv2 (strongswan).
Fill in the boxes as shown in the screenshot below from your AdGuard VPN dashboard:
IMAGE ATTACHED BELOW
Then, To prevent IPv6 leaks go to IPv6 tab and set Disable in IPv6 Method section.
```
https://i.imgur.com/izHMbsQ.png
https://i.imgur.com/4hLBWbc.png
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 1506
Replies: 4
Voters 1
