Creating a Site to Site Open VPN client connection to use my VPN provider (Privado)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi All,
I Need help setting up a Client to Site Open VPN to use my VPN provider (Privado), i have follow the instructions and everything says successful but VPN doesnt appear to do anything, when i check in the Insighst no VPN session is listed.
Here is what i have configured.
Also are there any logs generated anywhere that might shed soem mosre llight on why this isnt working?
Thank you all for your time
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @TheGoodsUk
Thanks for posting in our business forum.
1. If you need to input the username and password, you should do this on the page of the VPN client config page. Instead of creating a "User" in the "VPN User". I am not sure what guide you followed but this is definitely incorrect.
Is the username and password written to the .ovpn file? If yes, you don't have to add a new user. That's unrelated and unnecessary.
2. Check your VPN provider version. Note the Omada routers are not using the latest OVPN versions. That might be a compatible OVPN version issue. We cannot fix it now until we have a new firmware supporting a newer version.
3. Check your OVPN encryption method. Some encryption may not be supported.
4. And I am reading you are using the factory firmware which should be avoided. You should use at the least the latest public release or use the beta.
I recall that the OVPN we have for Omada is V2.6.
- Copy Link
- Report Inappropriate Content
Upgrading the Firmware to 2.2 fixed the issue, and gave the missing user creds setting in the VPN profile, once that ewere also set everything worked.
ThanksThansk again for all your help
- Copy Link
- Report Inappropriate Content
Hi @TheGoodsUk
Thanks for posting in our business forum.
1. If you need to input the username and password, you should do this on the page of the VPN client config page. Instead of creating a "User" in the "VPN User". I am not sure what guide you followed but this is definitely incorrect.
Is the username and password written to the .ovpn file? If yes, you don't have to add a new user. That's unrelated and unnecessary.
2. Check your VPN provider version. Note the Omada routers are not using the latest OVPN versions. That might be a compatible OVPN version issue. We cannot fix it now until we have a new firmware supporting a newer version.
3. Check your OVPN encryption method. Some encryption may not be supported.
4. And I am reading you are using the factory firmware which should be avoided. You should use at the least the latest public release or use the beta.
I recall that the OVPN we have for Omada is V2.6.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Upgrading the Firmware to 2.2 fixed the issue, and gave the missing user creds setting in the VPN profile, once that ewere also set everything worked.
ThanksThansk again for all your help
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 584
Replies: 3
Voters 0
No one has voted for it yet.