Hi @bp1000
If you're considering swapping out an EAP245 for an EAP610 to take advantage of Wi-Fi 6 (802.11ax), there are a few things you should be aware of:
The OC200 controller is designed to be compatible with all Omada EAPs. However, always check the firmware version of the OC200. You'd better check whether you're running the latest firmware, as newer devices like the EAP610 might require updated controller software to be fully supported.
Besides,The EAP610 and EAP245 might have slightly different physical dimensions or mounting mechanisms. While it's likely you can use the existing cable placement, be prepared for possible adjustments to the mounting mechanism.
You mentioned not having 3x3 MIMO clients, which the EAP245 supports. The EAP610, being a WiFi 6 device, will offer other advantages like OFDMA and BSS Coloring, which can improve performance in congested environments. If your devices support these features, you could see benefits beyond just raw speed.
Beyond just speed, WiFi 6 introduces improvements in efficiency, especially in crowded environments. This means better performance when multiple devices are connected.
You mentioned already achieving speeds of >500Mbps for clients. While Wi-Fi 6 can offer speeds beyond this, remember that real-world benefits will depend on your internet connection, the type of tasks you're doing, and the devices you're using.
About Coverage:
Wi-Fi 6 does not necessarily guarantee better coverage. Coverage is more about the power, antenna design, and placement of the access point. However, Wi-Fi 6 is designed to provide better performance at the edge of the coverage area, so devices further from the AP might see more stable connections and faster speeds.