I work in music production.  I use a private LAN to control an audio console.  I am starting to operate on stages where my 650 isn't strong enough to reach from either the stage or my mixing position so I want to create a mesh network.

I currently have the following:

 1x PoE Network Switch

 1x EAP650

 1x EAP225 (new, yet to be intregrated)

My goal is to link the two EAPs together so I can seemlessly transition between the stage and mix position (sometimes over 100' away from the stage).

My current issue is that when I try to connect to an EAP control panel either on my 650 or my 225 the address tplinkeap.net,  tplinkwifi.net, 192.168.0.1, 10.0.0.0, all do not resolve.

I have done the following:

 1. Isolate the two EAPs

 2. Directly connect via ethernet

 3. Try to use the Omada Controller Software