Business Community > Routers > ER8411 - Dual WAN with faillover, primary WAN isn't prioritized after reconnection
< Routers

ER8411 - Dual WAN with faillover, primary WAN isn't prioritized after reconnection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
12

ER8411 - Dual WAN with faillover, primary WAN isn't prioritized after reconnection

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
13 Reply
Re:ER8411 - Dual WAN with faillover, primary WAN isn't prioritized after reconnection
2023-09-12 11:51:36

 Problems appear with the last update ou Er8411. Before all was good. Same issue.

Fix only with downgrade of Er8411 and Oc300 to be stable.

 

  0  
  0  
#12
Options
Re:ER8411 - Dual WAN with faillover, primary WAN isn't prioritized after reconnection
2023-09-13 03:53:07

Hi @Gilles72 

Thanks for posting in our business forum.

Gilles72 wrote

 Problems appear with the last update ou Er8411. Before all was good. Same issue.

Fix only with downgrade of Er8411 and Oc300 to be stable.

 

OP said this is in standalone. How did you test your device? What steps did you perform? I'd hear a more accurate description with a methodology to replicate the issue.

Or this could be a false alarm and not worth much attention because we cannot replicate it and don't have details.

In the previous replies, I used ER8411 V1.3.0 firmware and performed in the standalone, OP has already found out the difference between my test result and his setup.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#13
Options
Re:ER8411 - Dual WAN with faillover, primary WAN isn't prioritized after reconnection
2023-09-22 13:35:06

Clive_A wrote

Hi @EmuAGR

When failover is enabled, backup WAN is offline until the Online Detection fails to ping through primary and tells the router to switch over. It's been like this ever since the Omada router was released years ago.

 

  @Clive_A I've been testing this for a week and it seems the failover works as expected now, enabling load balancing indeed fixed the issue. I could also check that no traffic was sent to the backup WAN, except the VoIP calls, due to the static routes I added.

 

So I think this works as expected then, and marked your post as the solution. Thank you!

  1  
  1  
#14
Options
12

Tags

WAN Setup Routing Load Balancing Highlighted Thread
Related Articles
ER8411 & DHCP WAN ?
542 0
ER8411 Loss of WAN connectivity after power outage
865 0
Adding firewall between WAN and ER8411 - will this work?
1097 0
Unrestrict the use of primary 10g WAN*only* port on the ER8411. Make it WAN/LAN please.
1178 1
ER707-M2 - Primary WAN Slows Down when Backup WAN Is In Use
652 0
er706w-4g use LTE/4G as primary WAN
394 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.